User's Manual
MMX 2013 MW345 Bluetooth Pureplay
Rev B
Spring 2013 Open Audio I User Interface Documentation
Imation Condential / August 2nd, 2012 / Kelsey Halberg
5. VOLUME
5.1 Click [+] to increase volume level, [-] to decrease volume level. Holding [+/-] down for 1+ seconds activates rapid
increase or decrease of volume level. An audible indicator will notify user when maximum and minimum volumes
are reached. Rapid increase/decrease should be 7 seconds between lowest and highest volumes.
6. LINE IN SOURCE
6.1 Line-in source becomes active when it detects a live input to the line-in jack.
7. BLUETOOTH
7.1 Click to enter BT mode.
7.2 When in BT mode, the BT icon will illuminate blue continually, if connected to a BT device.
8. FIRST CONNECTION
8.1 To pair with a device for the rst time, press the ‘Bluetooth’ button on MW345. The speaker will enter pairing
mode and become visible to compatible Bluetooth devices. The product will beep once indicating that you have now
entered ‘discoverable’ mode.
8.2 Bluetooth LED will blink slowly, approximately 2-3 times per second in this mode and the Device will stay in
‘discoverable’ for 2 minutes or until successfully paired and connected.
8.3 The speaker will appear as “Memorex MW345” to compatible devices.
8.4 After successfully pairing and/or when in BT mode, the product should beep once and the BT icon will illuminate
blue continually. If the pair is not successful, the BT icon will revert to the slow blink rate and produce a ‘failed’ beep.
8.5 Bluetooth connection will not terminate when switching between Bluetooth and Line-In sources.
8.6 MW345 will send “pause” signal to streaming devices when moving from BT to line-in mode.
9. RETURNING CONNECTIONS
9.1 When powered on and in Bluetooth source mode, MW345 will automatically connect to the most recently paired
device if it is available.
10. SPEAKERPHONE
10.1 INCOMING CALLS
10.1.1 When paired and connected with a mobile phone which is receiving an incoming call, MW345 will emit
a default, pre-set ringtone.
10.1.2 To answer the call through the MW345, press the ‘answer’ button on MW345. Audio and microphone
functions will be executed by MW345.
10.1.3 To answer a call privately on your phone, while connected to MW345, press the ‘answer button’ on your
smartphone.