Imation Drive Manager Software User’s Manual Rev002 P1 of 11
Contents Introduction ..................................................................................................................3 Features ....................................................................................................................3 System Requirements...............................................................................................4 Handling and Operating Recommendations..............................................................
Introduction Thank you for your purchasing the Imation Flash Drive. This portable Plug & Play USB Flash Drive enables you to exchange a large amount of data easily between computers with a USB port. This USB Flash Drive includes a program that enables you to create partitions on the drive and set a secure password protected secure area for your personal data. Imation Drive Manager Features • Drive partitions and a password protected Security Area • Full compliance with USB spec v2.0 and v1.
System Requirements • Desktop or laptop computers with USB 1.1 or USB 2.0 port • One of following operating systems Windows ME Windows 2000 Windows XP Vista Handling and Operating Recommendations 1. Do not use excessive force to insert the drive into the USB port. If it will not enter the USB port, recheck to see that the drive is properly oriented before trying to insert again. 2. Please keep this Flash Drive away from excessive heat, direct sunlight, and water. Do not bend, flex, or drop it. 3.
Drive Partitions and Security Function The Imation USB Flash Drive includes a utility program named “Imation Drive Manager.exe” to enable the user to partition the Flash Drive and/or to set Security Area with a password check to secure your personal data. Important. Before implementing, save “Imation Drive Manager.exe” to your host computer in a convenient location. “Imation Drive Manager.exe” will be removed from the Flash Drive after the first implementation.
1. Flash Drive Profile: Shows Vender Name, assigned Drive letter, and Drive capacity of this Flash Drive. 2. Public Area: Shows the Drive capacity of the public area. The minimum capacity of this area is 3MB. 3. Security Area: Shows the drive capacity of t h e security area. The minimum capacity of security area is 3MB. 4. Capacity Scroll Bar: Users can drag the scroll bar to adjust the drive capacity between the public area and security area.
Security Function 1111 11. PASSWORD: After enabling the password option, the display windows of 12, 13 and 14 become valid to edit as shown in the following. After filling in the password information, the capacity of the Security Area will be allowed to be set in the PARTITION function. In other words, if this option is not enabled, users are not allowed to set the capacity of the Security Area 〈i.e. no Security Area〉.
12. Enter Password: Users can set the password for Security Area. User can key in a minimum of 6 characters to use as a password (16 characters maximum). 13. Verify Password: Type the password again as verification. 14. Hint: The optional Hint area is used to remind authorized users of the password.
11 55 22 33 66 1. Drive State: 44 Indicates drive mode of the USB Flash Drive. State is LOCKED, users have access to the Public Area. When the Drive When the Drive State is UNLOCKED, users have access to the Security Area. 2. Unlock: If the USB Flash Drive is in LOCKED mode, users can enter the password then click the “Unlock” button to switch to UNLOCKED mode to access Security Area. In UNLOCK mode, the display is shown as below: 3.
99 77 1100 88 4. Close: Click this button to close the program. 5. Enter Password: Enter t h e password to gain access t o t h e Security Area. 6. Hint: Hint area is shown to remind users of the password. 7. Cancel: Click this button to cancel the password change. 8. Apply Change: Click this button to complete Change Password for the Security Area. 9. New Password: Enter a new password here. The password must be a minimum of 6 characters.
Disclaimer All the information in this document is subject to change without prior notice. The manufacturer makes no representations or any warranties regarding the contents of this manual. The information contained in this manual is provided for the general use by the customers. No part of this document may be reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
