TANGO TM TRX user’s guide ipu-trxd-11
Congratulations on your purchase! Thank you for purchasing Tango TRX with dock, the 2.1 wireless high fidelity audio system. The following pages explain the features and operation of the Tango TRX with dock. Please take a few moments to read through this manual. For enhanced functionality and control, download the free XtremeMac Tango TRX app from the iTunes app store. Note: app only works with iPhone and iPod touch models.
Email: support@xtrememac.com Telephone number: 1-866-392-9800 (Toll free within the United States) Hours of operation: Monday through Friday, 12pm – 9pm EST PRODUCT SAFETY When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water - This apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
1 2 3 5 4 3 6 7 9 1. 2. 3. 4. 5. 6. 7. Power Source Volume controls Play/pause Next/previous track Bass control Treble control 2 System Specifications • Total Power: 30W RMS • Line-in Sensitivity: 500mV RMS • Bass Control@100Hz: +/- 8dB • Treble Control@10kHz: +/-8 dB • SNR: >80dB Speaker Specifications • Dual 2.75” ported drivers • Dual 1.4” dome tweeters • Downward firing subwoofer 3.5” Unit Dimensions • 13.75”w x 4.25”d x 5.90” h 6 AUX IN 1 18V 2.
10 11 4 5 6 7 8 3 1 1. Volume control knob 2. Dock connector 3. LED status indicators - source, volume, bass/treble 4. Play/pause control 5. Bass control 6. Treble control 7. Source control - iPod / iPhone, Bluetooth, Aux 8. Power button 9. iPod adapter insert holes 10. IR remote sensor 11. Built-in microphone 1. Line in jack 2.
The dock will allow you to power and charge your iPod/iPhone/iPad while transmitting over Bluetooth 1. Remove the dock, back support, screw and AC adapter from the packaging and properly dispose of any packaging materials. 2. Place unit on a level surface close to a power outlet following the precautions listed in the safety warnings. 3. Place the back support with the tall edge facing outward on the top of the dock aligning the center slit over the screw hole. 4.
Listening to your iPod/iPhone through the dock connector 1. If playing an iPhone, skip to the next step 3. 2. If playing an iPod classic, touch or nano, insert the included adapter into the two holes behind the dock connector and press firmly to ensure a proper connection. 3. Carefully place your device into the dock connector. 4. Press the on the top of the unit or the remote to power on Tango TRX. 5.
Using the XtremeMac App For enhanced functionality and control, download the Tango TRX app. It will allow you to control volume, EQ settings, play/pause and other iPod functions directly from your iPhone or iPod touch. Listening to your device through the auxiliary line-in jack 1. Connect a 3.5mm audio cable (available at www.xtrememac.com) to the headphone or line out jack of an audio device and plug the other end of the cable into the Aux jack on the back of the unit. 2.
Check AC adapter connection on powered dock Connect the AC adapter into the jack in the back of the charging dock labeled "5V 2.1A" and then plug the AC adapter into the wall outlet. Check wall outlet function Plug another device into the same outlet to confirm the outlet is working. NO SOUND FROM SPEAKERS Check audio source Push the source button on the top of the unit or on the remote to select the desired audio source. Check volume level Turn the control dial or use the remote to adjust the volume.
XtremeMac.com Imation Europe B.V., Siriusdreef 46-52, 2132 WT Hoofddorp, The Netherlands Made in China | Fabriqué en Chine. Designed in the USA. © Imation Corp. XtremeMac, Tango and the “X” logo are trademarks of Imation Corp. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
