User Manual

The Soma BT will also remember the paired unit

so that when it is close by, it will automatically

be paired.

5. Adjust the Volume using the Volume –

V or + W buttons.

6. If the external device is a phone and you receive

a call, the playing audio will mute. Press the

Bluetooth button U on the Soma BT and the

microphone on this unit will activate, and the

phone call will be heard through the Soma

BT. Make sure you now speak into the Soma

BT instead of your phone. If you do not want

to answer the call, press and hold the Bluetooth

button U for two seconds.

When done with the phone call, press the

Bluetooth button U again and the playing audio

will resume.

NOTE: If you use the actual phone to answer the

call, then the phone call will not be heard through

the Soma BT.

7. When connected

to an iPod, iPad or

iPhone, the battery

status will appear on

the device as shown on the right.

8. Turn the unit off when done to save battery

power.

Using the Soma BT with the Line In Jack

1. Turn on the unit as shown previously.

2. Connect the Line Out from the external unit

to the Line In jack on the Soma BT. Audio played

through the external device will now be heard

through the Soma BT.

3. Adjust the Volume using the Volume –

V or + W buttons.

4. Turn the unit off when done to save

battery power.

Imation Confidential - Use Only By Permission

Controlled material extracted from Matrix on Feb 21, 2012

06:29:49 PM CST [Bundled with Packaging Configuration 99-

0000-2015-8 A]