User Manual

ManualsBrandsIMAX ManualsBatteries & ChargersB6 50W 5A Charger/Discharger 1-6 Cells (GENUINE)

Data storage program

For your convenience, B6 has a data storage and load program. It can store five battery data

representing the respective specifications of batteries. You can call back the data when charging

or discharging without setting up the program again. Press START/ENTER key to make it blink,

and use INC or DEC to set up the parameter.

Voltage

DEC

PROGRAM SELECT

SAVE DATA

SAVE [01] NiMH

14.4V 3000mAh

NiMH CHARGE At*

CUR LIMIT 5.0A

NiMH DICHARGE*

1.0A 11.0V

NiMH CYCLE *

DCHG>CHG 3

Data

number

INC

Capacity

DEC

INC

Type of

battery

Start

Enter

Start

Enter

‘>3seconds’

Batt type

stop

Save

DEC

INC

Start

Enter

‘>3seconds’

Set up the charge/ discharge sequence and cycle number.

Set up the discharge current and final voltage.

Set up the charge current in the manual mode, or current limit in the auto

mode. Press INC and DEC key simultaneously to make the current field

blink to switch the charge mode.

Setting of the parameter in the screen will not affect the charge and

discharge process. They just present the specification of the battery.

The example is NiMH battery pack, including 12 cells, the capacity is

3000m Ah.

Saving the data