User Manual

Various information in the program
DEC
DEC
DEC
DEC
DEC
End Voltag
12.6v(3s)
Capacity Cut-Off
On 5000mAh
Safety Timer
ON 200min
USB/Temp Select
USB Enabled
Ext.Temp 26C
IN Power Voltage
12.56V
4.14 4.16 4.09
0.00 0.00 0.00
It comes to the final voltage when the program ended.
3-pin connector is selected to be the USB port.
The external temperature is displayed when the temperature probe is
used.
The battery is connected with each port through cable; you can check
voltage of each cell in the battery pack. When the cable is connected
with the ports on the right of the charger, the program will display voltage
of up to 6 batteries. The battery pack needs an output connector
connected with each cell.
Present input voltage.
27