INSTRUCTION MANUAL TOUCH SENSITIVE 3.2” (320x240 dot) COLOR LCD SCREEN 200Watt Manufactured by SKYRC TECHNOLOGY CO., LTD. www.skyrc.com All specifications and figures are subject to change without notice. Printed in China 2013 7504-0347-01 Professional Balance Charger / Discharger Battery Meter / Motor RPM Tester / Servo Tester Version 1.
TABLE OF CONTENTS INTRODUCTION INTRODUCTION 01 MAIN FEATURES 03 WARNING AND SAFETY NOTES 05 HOMEPAGE 07 OPERATION PROGRAM 08 CHARGING STATUS MONITOR 14 USING THE CHARGE CONTROL SOFTWARE “CHARGE MASTER” 14 BATTERY METER 15 MOTOR RPM TESTER 16 SERVO TESTER 17 MEMORY PRESET-DATA STORE/LOAD 18 SETTING 19 ERROR MESSAGE 21 SPECIFICATION 22 RECOMMENDED ACCESSORIES 23 CONFORMITY DECLARATION AND LIABILITY EXCLUSION 24 WARRANTY AND SERVICE 24 INTRODUCTION Congratulations on your c
INTRODUCTION MAIN FEATURES FEATURES Color LCD Touch Screen 3.2"(320x240 dot) Touch System Equipped with a 3.2” touch sensitive color LCD screen, it is intuitive as all the operating and changing status can be displayed in this screen. What's more, the touch screen can register the users' input precisely so that the users can have a wonderful and comfortable “touch” experience.
MAIN FEATURES WARNING AND SAFETY NOTES Motor RPM Tester Users connect the sensor motor and charger with sensor wire, set the pulse width and test the RPM of the motor. Servo Tester Connect the servo and the charger with wire, change the pulse width value and check whether the servo works or not. Re-Peak Mode of NiMH/NiCd Battery In re-peak charge mode, the charger can peak charge the battery once, twice or three times in a row automatically.
WARNING AND SAFETY NOTES HOMEPAGE Charging During charge process, a specific quantity of electrical energy is fed into the battery. The charge quantity is calculated by multiplying charge current by charge time. The maximum permissible charge current varies depending on the battery type or its performance, and can be found in the information by the battery manufacturer.
OPERATION PROGRAM OPERATION PROGRAM OPERATION PROGRAM LiPo 6S BATT TYPE and ▲ Browse - Touch the arrow ▲ and ▼ or ▲ How to operate the charger? Here are the detailed procedures to make the charger work. All the screens and operations will take LiPo-CHARGE program for example, LiPo P1 C6.0A / D2.0A OPERATION Pb VOLT METER LiPo CHARGE Lilon DISCHARGE CELLS CAPACITY SETTING PRESET 1.Connection 1).Connecting to Power Source to browse all the selections 6S P1 C6.0A / D2.
OPERATION PROGRAM OPERATION PROGRAM 1).Battery type LiPo 6S BATT TYPE P1 C6.0A / D2.0A OPERATION Please touch the arrow ▲ and ▼ to browse six kinds of battery types and find the right battery type. And the selected one will be framed. 3. Charging Program Depends on different battery type, the operation programs are different. Batt Type LiPo CHARGE CHARGE This charging mode is for charging LiPo/LiFe/LiIon battery in normal mode.
OPERATION PROGRAM OPERATION PROGRAM 4. Program Start 5. Program Stop Touch start button or touch and hold the framed operation program for 3 seconds to start the program. And the charger will detects battery cells automatically. If the detecting result and your setting are identical, the charger will start working automatically. LiPo 6S BATT TYPE P1 C6.0A / D2.0A LiPo 6S OPERATION BAL CHARGE Pb FAST CHG LiPo BAL CHARGE Lilon VOLT METER CELLS CAPACITY SETTING PRESET P1 C6.0A / D2.
CHARGING STATUS MONITOR BATTERY VOLT METER CHARGING STATUS MONITOR When the charger is working, the users could check the real time status of charging capacity, cell voltage, charging time, external and internal temperature easily. What's more, it can also display the voltage in a graphic which helps the user monitor the charging status all the time. Please touch “GRAPH” to check charging/discharging curve. C6.0A / D2.0A P1 LiPo BAL CHARGE E.TEMP: 0 C CURRENT: 2.0A I.
MOTOR RPM TESTER SERVO TESTER MOTOR RPM TESTER Users connect the sensor motor and charger with sensor wire, set the pulse width and test the RPM of the motor. Please do as follows, 1. Connect the motor and ESC. 2. Switch off the ESC and connect it to the battery. 3. Connect the power to the charger. 4. Insert the ESC signal wire to ESC port in the charger. 5. Connect the motor and charger with motor sensor wire. There is a motor sensor port beside the temp sensor. 6.
MEMORY PRESET-DATA STORE/LOAD SETTING 1. EDIT AND BACK Touch “EDIT” to set the profiles and “HOME” to homepage. Touch “CONFIRM” to confirm the setting and go back to previous screen. LiPo 6S P1 C6.0A / D2.0A BATT TYPE OPERATION HOME 6S 2.0A/1.0A EDIT EDIT Pb BAL CHARGE P2 LiIon 6S 2.0A/1.0A LiPo VOLT METER P3 LiFe 3S 2.0A/1.0A EDIT Lilon CHARGE P4 NiMH 7S 2.0A/1.
SETTING ERROR MESSAGE SETTING NEXT CAPACITY CAPACITY CUT OFF 5000 mAh SAFETY TIME OFF 120 Min TEMP. CUT OFF 45 C/113 F HOME ENTER It incorporates a variety of functions for the systems to verify processes and the state of the electronics. In case of an error the screen will display the cause of error and emit an audible sound. NEXT SAFETY ” ▲ Please touch CUT OFF and TIME OFF screen to make the functions ON or OFF. And touch “ and “ ” to get the proper parameter.
SPECIFICATION RECOMMENDED ACCESSORIES SPECIFICATION RECOMMENDED ACCESSORIES Input Charge Circuit Power DC 11-18Volt Charge Current Range Discharge Circuit Power 0.1-12.0A Discharge Current Range 0.1-5.
CONFORMITY DECLARATION CONFORMITY DECLARATION SKYRC T6200 satisfies all relevant and mandatory EC directives and FCC Part 15 Subpart B: 2008.
