Operation Manual
Table Of Contents
- 1. Quick Start
- 2. Introduction
- 3. Getting Started
- 3.1. Installation
- 3.2. Injector Features
- 3.3. Symbols
- 3.3.1. Symbols used in this manual
- 3.3.2. Symbols used on labelling
- 3.3.3. Handswitch and Footswitch
- 3.3.4. Icons and Buttons used on the Injector Touch Screen Graphical Interface
- 3.3.5. Injector Buttons
- 3.3.6. Remote Control Symbols and Buttons
- 3.3.7. Injector Visual Indicators
- 3.3.8. Icons and Buttons used on the RCU Touch Screen Graphical Interface
- 4. Clinical Information
- 5. Operation Description
- 5.1. Turning the System On for the First Time
- 5.2. Syringe, Quick Fill Tube, Fill Spike, and Connector Tubes
- 5.3. Filling a Syringe Using a Quick Fill Tube (QFT) or Fill Spike on the Injector
- 5.4. [Optional] Off-line Filling
- 5.5. Connector Tube Installation
- 5.6. Dismounting a Syringe
- 5.7. Performing an injection
- 5.8. Programming
- 5.9. Options Menu
- 5.10. [RCU models] Operation Description with Remote Control Unit
- 5.10.1. RCU Features–
- 5.10.2. The Injector and the RCU
- 5.10.3. Turning the System On / Off
- 5.10.4. Injector Controller Application
- 5.10.5. Filling State
- 5.10.6. Routine Protocol
- 5.10.7. Arming
- 5.10.8. Check for Air
- 5.10.9. Starting the Injection
- 5.10.10. Injection in Progress
- 5.10.11. Injection Control Buttons
- 5.10.12. Injection Review
- 5.10.13. Protocol Edit
- 5.10.14. Edit Lock
- 5.10.15. Parameter Value Edit
- 5.10.16. Injecting remaining volume
- 5.10.17. Edit Phase Type
- 5.10.18. Open Protocol
- 5.10.19. Protocol Save
- 5.10.20. Common Injecting Alarms / Warnings
- 5.10.21. RCU Manager
- 5.10.22. RCU Setup
- 5.10.23. History Viewer
- 5.10.24. Protocol Manager
- 5.10.25. eGFR (glomerular filtration rate) Calculator
- 5.11. [Optional] DC200 Scanner Interface
- 5.12. [Optional] Protocol Assistance Tool (PAT)
- 6. Cleaning and Maintenance
- 7. Trouble-shooting
- 8. Specifications
- 8.1. Dimensions
- 8.2. Mechanical
- 8.3. Functional
- 8.4. Controls
- 8.5. Environmental
- 8.6. Electrical
- 8.7. Connectors
- 8.8. IEC 60601-1 Classifications
- 8.9. Ground Continuity
- 8.10. RoHS Statement
- 8.11. IEC60601-1-2:2014 (4th Ed) Compliance
- 8.12. Models
- 8.13. Accessories
- 8.14. Manufacturer’s Software License Information
- 8.15. FCC Statement
- 9. Index
92 MEDRAD
®
Salient Operation Manual
8.12. Models
Model Number Description
DC009S MEDRAD
®
Salient Contrast Injector Single
DC009D MEDRAD
®
Salient Contrast Injector Dual
DC009SW MEDRAD
®
Salient Contrast Injector Single with Wireless RCU
DC009DW MEDRAD
®
Salient Contrast Injector Dual with Wireless RCU
8.13. Accessories
Accessory (shaded options are included standard with each injector) Part number
1. Power Cord WP0023 (AU)
WP0020 (BR)
WP0021 (JP)
WP0016 (EU)
WP0015 (CH)
WP0019 (CN)
WP0022 (IT)
WP0024 (KR & EU)
WP0009 (US, COL, PE)
WP0025 (UK)
WP0033 (JP/US)
2. 190 ml Syringe with quick fill tube (QFT) – tray (box of 50) ZY6320
3. 190 ml Syringe with spike – tray (box of 50) ZY6321
4. 190 ml Syringe with quick fill tube (QFT) – pouch (box of 50) ZY6322
5. 190 ml Syringe with spike – pouch (box of 50) ZY6323
6. 190 ml Syringe with spike, 150 cm connecting tube (box of 50) ZY6324
7. 190 ml Syringe with quick fill tube (QFT), 150 cm connecting tube (box of 50) ZY6325
8. 150 cm Extension tube single (box of 50) ZY5151
9. 150 cm Extension tube T-connector (box of 50) ZY5152
10.
Heat Maintainer (1x for all systems) DC022
11.
Hand-switch SF0005
12.
Footswitch SF0004
13.
Remote Control VP021
14.
Battery (2 required) HB0013
15.
Off-line syringe loader MDL001
16.
DC200 Scanner Interface Box DC200
17.
IV holder DC039
18.
Wi-Fi Extender (with DC009SW and DC009DW) DC121