Leaflet

ManualsBrandsIMC Networks Manualsnetwork media convertersIMCV/T1/E1/J1/TP/Eiber/SM1310+ST

iMcV-T1/E1/J1 products are physical layer devices that convert twisted pair to fiber

optics and operate at a switch-selectable protocol rate of T1 (1.544), E1 (2.048)

and the Japanese J1 (1.544). iMcV-T1/E1/J1 products offer more fiber choices and

distances because they are engineered to the industry standard 8B/10B PHY

encoding.

Available with remote management via the fiber port, the SNMP-manageable

iMcV-T1/E1/J1 products enable network managers to conduct loopback testing,

and monitor and manage units located up to 100 km away at a remote location.

Full bit rate for customer traffic

Since IMC Networks’ management technology functions transparently to the

frame format, customers will not experience overhead or loss of a data channel

typically associated with remote management or SNMP polling. Customer traffic

will always be full bit rate: 1.544 Mbps or 2.048 Mbps.

Troubleshooting made easy; iMcV-T1/E1/J1 products include:

• A line integrity test feature

• Three modes of operation for loopback testing (local, remote and analog

loopback)

• The Transmit Data Source diagnostic feature which sends specific patterns of

data (transmit all unframed ones; transmit a pattern of zeros, and ones and

transmit a Pseudorandom Bit Sequence [PRBS]) to determine problems with

the cable.

Configure all test modes remotely via iView² SNMP software or locally by manu-

ally setting DIP switches on the units. In addition, iMcV-T1/E1/J1 also includes an

internal elastic buffer to remove jitter from transmitted data.

Application Example

iMcV-T1/E1/J1 media converters allow users to link two PBXs, CSUs or routers and

extend the distance between the two over fiber.

Switch Selectable Protocol

• Operates at T1 (1.544),

E1 (2.048) and J1 (1.544) protocols

Remote management

• Conduct loopback tests,

• Monitor/manage units via GUI-Based

iView²

• Full bit rate for customer traffic

Easy to configure and manage with

GUI-based iView²

• Up and running in less than five min-

utes

• Easily adjust settings when user

requirements change

• Easy upgrades; no user intervention

or visits to remote locations required

• Monitor and control all connections

Supports more fiber choices

• Available for multi-mode or single-

mode fiber

• Single-strand fiber versions

• Supports very long fiber distances

Eases Troubleshooting

• Three loopback testing modes, plus

SNMP management and LEDs assist

in diagnosing problems on fiber optic

networks

iMcV-T1/E1/J1

www.imcnetworks.com 800-624-1070 www.mediaconverter.com

Telco Converters

with Remote Management

iMcV-T1/E1/J1 products are ideal for extending PBX

or legacy Telco circuits over fiber optics in the local

loop and long-haul applications.

Summary of content (2 pages)

PAGE 1
iMcV-T1/E1/J1 Telco Converters with Remote Management iMcV-T1/E1/J1 products are ideal for extending PBX or legacy Telco circuits over fiber optics in the local loop and long-haul applications. iMcV-T1/E1/J1 products are physical layer devices that convert twisted pair to fiber optics and operate at a switch-selectable protocol rate of T1 (1.544), E1 (2.048) and the Japanese J1 (1.544).
PAGE 2
Easily configure/manage converters with the GUI-based iView²: As an SNMP management application, iView² gives network managers the ability to monitor and control IMC Networks' products. iView² runs standalone on Windows NT/XP/2000, as a standalone Java Application for other operating systems, as a snap-in module for HP OpenView, as a Web Server running under IIS or as a Java Web Servlet. For assistance in selecting the right version of iView², visit http://www.imcnetworks.