Networks Company Overview Since 1988, IMC Networks has set a standard as a “Made in the USA” manufacturer of a variety of specialized and industrialgrade fiber media conversion and fiber optic access solutions for Enterprise, Government and Service Providers’ LANs, First-Mile FTTx networks and Metropolitan Area Networks, delivering 24 years of excellence in product quality, customer satisfaction and value.
Table Of Contents Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick Product Search Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Optical Access/FTTx Products IE-MultiWay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 AccessEtherLinX/4. . . . . . . .
Product Overview About Media Converters Media converters connect different types of cabling media, extending transmission distances well beyond the capabilities of twisted pair wiring, and allowing for integration of new fiber-based equipment into non-fiber legacy networks. Conversely, media converters also allow operators to preserve their investment in legacy copper-port hardware as more and more legacy copper networks are updated with fiber.
FTTx • • • • • • Unmanaged Managed • • Modular • • • • 4 • • 5 • 6 • 7 • • 8 • • • • • • • • • • 9 IE-MiniFiberLinX-II/Telco • • • • • • • • • 10 IE-MiniFiberLinX-II/LastGasp • • • • • • • • • 11 MiniMc, MiniMc SFP ** • • • • • • • • 12 Giga-MiniMc, Giga-MiniMc SFP, Giga MiniMc LFPT, PT, NEW! MiniMc-Gigabit • • • • • • • • • • 13 • • • • • • • 14 • • • • • 15 • • • • • • 16 • • • • • • 17 • • • •
Product Features The following icons highlight features that are found in IMC Networks’ products. The icons can be found on the top of each product page. Autocross Auto Cross Managed Autocross allows for automatic detection of the correct MDI / MDIX configuration on the copper ports (RJ-45), eliminating the need to specify different cables (crossover or straight-through) and thus eliminating another step in troubleshooting.
Auto Negotiation Managed Auto Cross Fiber Alert X FIBER LOS LINK X LINK V-LAN Tagging Link Loss X X LOS 10/100/1000 Mbps Ethernet Media/Mode Converter Last Gasp T T T IE-MultiWay Features The Most Compact, Versatile, Managed CPE Ethernet FTTx Device on the Market.
Auto Negotiation Managed Auto Cross Fiber Alert X FIBER LOS LINK LINK X V-LAN Tagging Link Loss X X LOS 10/100 Mbps Copper (TX) to 100 Mbps Fiber (FX) Fast Ethernet T T T AccessEtherLinX/4 Features Managed multi-port optical demarcation devices combining media conversion with advanced capabilities. Product Overview The AccessEtherLinX/4 enables service providers to offer differentiated, bandwidth-scalable data or “Transparent LAN” services to multi-tenant buildings and business customers.
Auto Negotiation Managed Auto Cross Fiber Alert X FIBER LOS LINK X LINK V-LAN Tagging Link Loss X X LOS 10/100/1000 Mbps Copper (TX) to 1000 Mbps Fiber (FX) Fast Ethernet T T T Giga-AccessEtherLinX-II Features A Managed Optical Demarcation device offering advanced “Multi-Tenant” capabilities unique to multi-port Ethernet-based CPE.
Managed Auto Cross Fiber Alert X FIBER LOS LINK X LINK Link Loss X X Q-in-Q LOS T TT V-LAN Tagging T T T UMA Last Gasp SNMP Auto Negotiation 1 IP Address 10/100 Mbps Auto Negotiating Copper (TX), 100 Mbps Fiber (FX) Ethernet (MAN, CityNet) iMcV-FiberLinX-II Features Optical demarcation module enabling delivery of transparent LAN services over fiber with integrated media conversion, carrier-grade remote management and line provisioning capabilities.
Managed Auto Cross Fiber Alert X FIBER LOS LINK X LINK Link Loss X X Q-in-Q LOS T TT V-LAN Tagging UMA 802.3ah SNMP Auto Negotiation T T T 1 IP Address 10/100/1000 Mbps Auto Negotiating Copper (TX), 1.25 Gbps (SX/LX) Gigabit Ethernet iMcV-Giga-FiberLinX-II Features An optical demarcation unit enabling delivery of transparent LAN services while providing carrier-grade management and line provisioning capabilities.
Managed Auto Cross Fiber Alert X FIBER LOS LINK X LINK Link Loss X X Q-in-Q LOS T TT V-LAN Tagging T T T Industrial Ethernet UMA PoE SNMP Auto Negotiation 1 IP Address 10/100 Mbps Auto Negotiating Copper (TX), 100 Mbps Fiber (FX) Ethernet (MAN, CityNet) IE-MiniFiberLinX-II Features Compact fiber optic CPE for industrial-grade delivery over fiber, with media conversion, carrier grade management and line provisioning capabilities.
Managed Auto Cross Fiber Alert X FIBER LOS LINK X LINK Link Loss X X Q-in-Q LOS T TT V-LAN Tagging T T T Industrial Ethernet UMA SNMP Auto Negotiation 1 IP Address PoE 10/100 Mbps Auto Negotiating Copper (TX), 100 Mbps Fiber (FX) Ethernet (MAN, CityNet) IE-MiniFiberLinX-II/Telco Ordering PhysicalInformation Specifications Features Fiber Types Supported Compact fiber optic CPE for industrial-grade delivery over fiber, with media conversion, carrier grade management and line provisioning
Managed Auto Cross Fiber Alert X FIBER LOS LINK X LINK Link Loss X X Q-in-Q LOS T TT V-LAN Tagging Industrial Ethernet T UMA SNMP Auto Negotiation 1 IP Address T T PoE 10/100 Mbps Auto Negotiating Copper (TX), 100 Mbps Fiber (FX) Ethernet (MAN, CityNet) IE-MiniFiberLinX-II/LastGasp PhysicalInformation Specifications Ordering Features Fiber Types Supported Compact fiber optic CPE for industrial-grade delivery over fiber, with media conversion, carrier grade management and line provisi
Auto Negotiation Auto Cross Industrial Ethernet IE-PowerTray/18 Product Features 10/100 Mbps Miniature Media Converters MiniMc, MiniMc SFP and IE-PowerTray/18-AC Features Ordering Information Perfect for a variety of applications MiniMc: TP-TX/SFP • Low Cost media converter • Standalone converter includes country specific, high-reliability power adapter or use converter with USB-power cord (10/100 Mbps only) Space saving alternative The smallest, most reliable and most cost effective switching and
Auto Negotiation 10/100/1000, 1000 Mbps Miniature Media Converters Auto Cross MiniMc-Gigabit, Giga-MiniMc, Giga-MiniMc SFP, Giga-MiniMc/LFPT Features Ordering Information MiniMc-Gigabit: TX/SX and TX/LX * NEW! Perfect for a variety of applications MiniMc-Gigabit, TX/SX-MM850-SC, 220/550 m 855-10730 MiniMc-Gigabit, TX/LX-SM1310-SC, 10 km 855-10731 MiniMc-Gigabit, TX/LX-SM1310/PLUS-SC, 40 km 855-10732 MiniMc-Gigabit, TX/LX-SM1550/LONG-SC, 80 km 855-10733 Single-Strand Fiber • Low Cost media converter
Auto Negotiation Auto Cross Industrial-Ethernet 10/100 and 10/100/1000 Switching Media Converters Industrial Ethernet IE-MiniMc & IE-Giga-MiniMc Features Ordering Information Most cost-effective fiber converter available today • Low cost, high flexibility — connects 10/100 Mbps copper to 100 Mbps fiber • Install for use in extreme temperatures Multiple powering options for a variety of applications The fast-growing MiniMc series includes an Industrial Ethernet model, allowing operation in extreme te
Auto Negotiation Auto Cross Industrial-Ethernet 10/100 and 10/100/1000 Switching Media Converters Industrial Ethernet IE-MiniMc/Telco & IE-MiniMc/Telco-LFPT Features Ordering PhysicalInformation Specifications The most cost-effective fiber converter available • Low cost and feature rich • Value add industrial grade extended temperature performance Versatile Solution The IE-MiniMc Series are Industrial Equipment (IE) versions of the popular MiniMc Series, offering a wide range of transmission speeds,
Auto Negotiation Auto Cross 10/100/1000 Mbps PoE & PoE+ Switching Media Converters PoE PoE and PoE+ Giga-MiniMc NEW! The PoE and PoE+ Giga-MiniMc is targeted for Gigabit and 100 Mbps applications that require power over Ethernet to locations where PoE is needed to power the unit. Product Overview The PoE and PoE+Giga-MiniMc are low-cost, compact, multi-port media converters that support both PoE and PoE+ standards.
Auto Negotiation Auto Cross PoE 10/100 Mbps Auto Negotiating Copper (TX), 100 Mbps Fiber (FX) Ethernet PD-Switch Features Ordering Information Physical Specifications Multi-port switch powered by the IEEE 802.
Auto Negotiation Auto Cross Fiber Alert X FIBER LOS LINK LINK X Link Loss X X 10, 100, 10/100 Mbps and 1000 Mbps Compact Media Converters LFPT LOS X X X McBasic Series McBasic TX/SX and TX/FX Ordering Information Features Perfect for a variety of applications • Small, rugged design offers many advanced features Meets a multitude of installation requirements With its small yet rugged design, internal AC power supply and troubleshooting features, the McBasic is the best standalone media conver
Auto Negotiation Auto Cross Fiber Alert X FIBER LOS LINK X LINK 100 Mbps Power Over Ethernet Sourcing Standalone Media Converters PoE Link Loss X X LOS PSE-McBasic Ordering Information Features Supporting the IEEE 802.3af PoE standard, the standalone PSE-McBasic media converter offers unparalleled installation flexibility and cost-savings. • • • • • • • • 100Base-TX twisted pair 100Base-FX or SX fiber IEEE 802.
Auto Negotiation Multi-Port, 10/100 Mbps Switching Standalone Media Converter Auto Cross AccessConverter Features Ordering Information Most cost-effective fiber converter available today • Low cost, high flexibility— same small unit performs media conversion and switching functions • Offers three downlink connections Perfect for a variety of applications Terminate fiber and connect multiple Ethernet devices — PCs, webcams, printers — at a remote location with the AccessConverter.
Fiber Alert LINK X FIBER LOS LINK X Link Loss X X LOS 10, 100, Switching 10/100 Mbps and 1000 Mbps Ethernet Modular Media Converters Mc Modules for MediaConverter Series (McPIM, McLIM, McGigabit) Features Ordering Information McLIM: TX/FX Modules meet a variety of installation requirements • Supports Ethernet, Fast Ethernet, and Gigabit Ethernet • Supports very long fiber distances A variety of chassis options A cost-effective solution for extending the life of legacy equipment and bringing fib
Auto Negotiation Fiber Alert X FIBER LOS LINK X LINK 10, 100, 10/100 Mbps PC Card Ethernet Media Converters Link Loss X X LOS McPC Series Features Ideal for fiber-to-the-desktop applications, the McPC installs directly inside a PC.
Auto Negotiation Fiber Alert X FIBER LOS LINK X LINK Link Loss X X LOS Switching 10/100 and Switching 10/100/1000 Mbps PC Card Ethernet Media Converters McPC-MediaLinX Series Features Ideal for fiber-to-the-desktop applications, the McPC installs directly inside a PC.
Auto Negotiation Fiber Alert X FIBER LOS LINK X LINK 1.
CWDM WDM (Wave Division Multiplexer) Media Converters WDM/2 Series Features Ordering Information Leverages investment on existing fiber infrastructure iMcV-WDM/2 (Double Wide Module) • Doubles the capacity of installed fiber by transmitting two wavelengths on one strand of fiber Supports multiple protocols • Speed and protocol-independent, supporting 1310 nm and 1550 nm single-mode fiber With WDM products, service providers and enterprise network managers can easily double fiber capacity and integra
CWDM Industrial Ethernet Modular 4 Channel CWDM Multiplexer/Demultiplexer IE-iMcV-MuxDemux/4 Ordering Information Physical Specifications Features NEW! The IE-iMcV-MuxDemux/4 is a CWDM Passive Optical Add/Drop Multiplexing (OADM) Module Product Overview Coarse Wavelength Division Multiplexing (CWDM) is a technology that enables the transmission of multiple optical signals on different wavelengths over one strand of fiber.
Auto Negotiation Managed Auto Cross Fiber Alert X FIBER LOS LINK LINK X Config Control LFPT Link Loss X X LOS X X X Dual Port, Extended Temperature (IE), 100 Mbps Ethernet SNMP-Manageable Media Converter IE-iMcV-2xLIM Features Ordering Information Physical Specifications Cost-effective and flexible Connectors: 2 x RJ-45 and 2 x SFP ports (SFPs sold separately) • Functions as two independent copper to fiber media converters, thus doubling port density in the iMediaChassis and MediaChassis
Auto Negotiation Managed Auto Cross Fiber Alert X FIBER LOS LINK X LINK Link Loss X X 10, 100, 10/100 Mbps Modular Converters Config Control LFPT LOS X X X iMcV-PIM, iMcV-LIM Modules Features Ordering Information Meets a variety of installation requirements iMcV-PIM 10 Mbps • Choose from a wide range of speeds up to Fast Ethernet • Available for multi-mode or single-mode fiber • Double fiber capacity with single-strand fiber versions • Supports very long fiber distances Easy to configure
Auto Negotiation Managed Auto Cross Fiber Alert X FIBER LOS LINK X LINK Link Loss X X 1000 Mbps Modular Converters Config Control LFPT LOS X X X iMcV-Gigabit Modules Features Ordering Information Meets a variety of installation requirements * IE-iMcV-Gigabit TX/SFP 1000 Mbps with Link Fault Pass-Through (LFPT) and Config Control • Available for multi-mode or single-mode fiber • Double fiber capacity with single-strand fiber versions • Supports very long fiber distances 850-18510 IE-iMcV
Auto Negotiation Managed Auto Cross Fiber Alert X FIBER LOS LINK X LINK Link Loss X X Rate Converting 10/100 Mbps and 10/100/1000 Mbps Modular Converters Config Control LFPT LOS X X X iMcV-MediaLinX, iMcV-Giga-MediaLinX Modules Features Ordering Information Meets a variety of installation requirements IE-iMcV-MediaLinX TX/SFP 10/100 Mbps with Link Fault Pass-Through (LFPT) and Config Control * • Choose from a range of speeds up to Gigabit Ethernet • Available for multi-mode or single-mode
Auto Negotiation Managed Auto Cross Fiber Alert X FIBER LOS LINK X LINK Config Control Link Loss X X T1/E1/J1 Modular Converters LOS iMcV-T1/E1/J1 and IE-iMcV-T1/E1/J1-LineTerm with Config Control Features Ordering Information Switch Selectable Protocol • Operates at (T1/J1 1.544 Mbps) and (E1 2.
Auto Negotiation Managed Auto Cross Fiber Alert X FIBER LOS LINK X LINK Link Loss X X DS3/E3/STS Modular Converters LOS iMcV-DS3/E3/STS Ordering Information Features Switch Selectable Protocol • Operates at 45 Mbps (DS3), 34 Mbps (E3) or 52 Mbps (STS-1) • Two versions to choose from: » Standard Version - offers repeater-like functionality » Line Terminating Version - supports “Telco” features, including Alarm Indication Signals (AIS) Management Protocol-selectable DS3/E3/STS Coax-toFiber medi
Auto Negotiation Managed Auto Cross Fiber Alert X FIBER LOS LINK X LINK Modular, Managed Four E1 Plus Data Extension Over Fiber Link Loss X X LOS iMcV-E1-Mux/4+Ethernet (Enhanced) Ordering PhysicalInformation Specifications Features Fiber Types Supported The IE-iMcV-E1-Mux/4 Transports Four E1 Extensions and One RS-232 Serial Link Over a Fiber Optic Line With Optional 1+1 Protection and Full-Bandwidth 10/100 Ethernet Support.
Auto Negotiation Managed Auto Cross Fiber Alert X FIBER LOS LINK X LINK Modular, Managed Four T1 Plus Data Extension Over Fiber Link Loss X X LOS IE-iMcV-T1-Mux/4 + Ethernet Features The IE-iMcV-T1-Mux/4 Transports Four T1 Extensions and One RS-232 Serial Link Over a Fiber Optic Line With Optional 1+1 Protection and Full-Bandwidth 10/100 Ethernet Support.
Auto Negotiation Managed Auto Cross 10/100Base-T Multi-Port Switch Module iMcV-Switch Modules Ordering Information Features Monitor all connections from a central site with iMcV Series multi-port switch modules.
Auto Negotiation Managed Auto Cross Fiber Alert X FIBER LOS LINK X LINK 10/100/1000 Mbps Ethernet Media / Mode Converter Module Link Loss X X LOS IE-iMcV-MultiWay NEW! A Compact, Versatile, SNMP Manageable Gigabit Ethernet Device That Offers internal and redundant powering options. Product Overview The IE-iMcV-MultiWay is a modular, CPE device providing two fixed 10/100/1000Base-T copper ports and 2 SFP ports. The SFP ports support fiber or copper SFPs.
Auto Negotiation Managed Auto Cross Fiber Alert X FIBER LOS LINK X LINK Link Loss X X 10/100 Mbps Ethernet Modular Power Injector LOS iMcV-PSE-MidSpan Features Ordering Information Physical Specifications The most cost-effective power injector solution available today • • • • Provides power to remote network devices Quality product Made in America Supports Class 1, 2, and 3 powered devices Compliant with IEEE 802.3af (Power over Ethernet) Low Installation Cost IEEE 802.
Auto Negotiation Managed 10/100Base-T, Ethernet over VDSL Auto Cross IE-iMcV-VDSL2-LANextender Features Ordering Information Physical Specifications Flexible Solution Fiber Types Supported • N/A • Media and protocol converter - converts 10/100BaseT to VDSL • Operates over existing CAT3 or other telephone cabling • Supports VDSL2 for Band Plan 997/998, symmetrical and asymmetrical transmission per ITU-T G.993.
Auto Negotiation Managed Auto Cross Fiber Alert X FIBER LOS LINK X LINK Protocol Independent Modular Converters Link Loss X X LOS iMcV-Fiber Mode Converters (iMcV-S2MM, M2MM, S2SM) Features Physical Specifications • Includes protocol-independent operation • Converts between dissimilar fiber modes and wavelengths Three Types of Mode Conversions: • Single-mode to Multi-mode (S2MM) • Single-mode to Single-mode (S2SM) • Multi-mode to Multi-mode (M2MM) The industry’s first protocol-independent fi
Auto Negotiation Auto Cross 100 Mbps to 2.4 Gbps Fiber Mode Converter Industrial Ethernet IE-ModeConverter SFP/SFP Connect network segments running different fiber types using interchangeable SFP modules. Product Overview Mode converters allow network operators to incorporate multiple fiber types within a network. The IE-ModeConverter provides the ability to accomplish this by working with existing equipment and thus, eliminating replacement costs.
Auto Negotiation Auto Cross Industrial Ethernet Modular Protocol-Independent, Fiber Mode Converter via SFP Modules IE-iMcV-ModeConverter SFP/SFP Connect network segments running different fiber types using IMC Networks’ interchangeable SFP modules. Product Overview The IE-iMcV-ModeConverter is an SNMP manageable module that allows network operators to incorporate multiple fiber types and wavelengths within a network.
Industrial Ethernet 100 Mbps Fast Ethernet IE-SFP 100 to 155 Mbps (OC-3) Modules Fiber Operating temperature: -40°C to +85°C (-40° F to +185° F) 155 Mbps Ethernet SFP Modules 1.25 Gbps Ethernet SFP Modules 2.4 Gbps Ethernet SFP Modules Copper Plug in more fiber types and maximize network hardware.
1.25 Gbps Gigabit Ethernet (OC-24) Industrial Ethernet IE-SFP 1250 Mbps/1.25 Gbps (OC-24) Modules Fiber Operating temperature: -40°C to +85°C (-40° F to +185° F) 155 Mbps Ethernet SFP Modules 1.25 Gbps Ethernet SFP Modules 2.4 Gbps Ethernet SFP Modules Plug in more fiber types and maximize network hardware. Ordering Information With DDMI IE-SFP/1250-ED Product Overview The use of IE-SFP modules makes changing fiber requirements within the locations of the network environment easy.
2.4 Gbps Ethernet (OC-48) & 10 Gbps (OC-192) Industrial Ethernet IE-SFP 2.4 Gbps (OC-48) and 10 Gbps (OC-192) Modules Fiber Operating temperature: -40°C to +85°C (-40° F to +185° F) 155 Mbps Ethernet SFP Modules 1.25 Gbps Ethernet SFP Modules 2.4 Gbps Ethernet SFP Modules Plug in more fiber types and maximize network hardware. Ordering Information With DDMI Product Overview The use of IE-SFP modules makes changing fiber requirements within the locations of the network environment easy.
Managed Chassis iMediaChassis The iMediaChassis line provides SNMP management capabilities when used in conjunction with the SNMP Module. Regulatory UL/cUL, CSA, CE, CB Version # of Slots Power Specs iMediaChassis/6 iMediaChassis/3 20 + 1 SNMP 6 + 1 SNMP 3 + 1 SNMP Product Description Redundant AC and DC Field replaceable AC Power Supply: 100-240V AC, 50/60Hz, 1A AC and DC Not field replaceable AC Power Supply: 100-240V AC, 50/60Hz, 0.
Unmanaged Chassis The MediaConverter lines operate with the following IMC Modules: MediaConverter Version 1-Slot 4-Slot 8-Slot 12-Slot AC 851-10901 851-10904 851-10908 851-10912 AC AC AC AC 115-230V AC, 50/60Hz, 0.3/0.15A 120-240V AC, 50/60Hz, 1.0/0.5A 100-250V AC, 50/60Hz, 1.6A 115-230V AC, 50/60Hz, 1.2/0.
Types of Fiber Connectors The ST Connector The FC Connector Which uses a bayonet locking system is the most common connector. Is a threaded connector used in high-vibration environments. The SC Connector The MTO Connector Has a molded body and a push-pull system. Is a connector that uses high-fiber-count ribbon cable. Used in high-density fiber applications. The LC Connector Is a small-form-factor connector, features a ceramic ferrule and looks like a mini SC connector.
Types of Modular Jacks T568A, T568B and USOC Wiring 6-Position 4 Contact (RJ-11) 1 23 4 56 7 8 1 23 4 56 7 8 1 23 4 56 7 8 1 2 34 5 6 6-Position 6 Contact (MMJ) T568A T568B USOC Pair 3 Pair 4 Pair 1 Pair 2 1 2 34 5 6 Straight-Pinned and Crossover Cable 8-Position 8 Contact (RJ-45) Straight-pinned cable has the most common type of pinning. The send and receive pairs are wired straight through on either end of the cable.
Networks www.imcnetworks.com IMC Networks Headquarters/Western US 19772 Pauling Foothill Ranch, CA 92610 TEL: 949-465-3000 FAX: 949-465-3020 sales@imcnetworks.com IMC Networks Eastern US/Latin America Corporate Square 28050 US 19 North, Suite 306 Clearwater, FL 33761 TEL: 727-797-0300 FAX: 727-797-0331 latinsales@imcnetworks.com IMC Networks Europe Herseltsesteenweg 268 B-3200 Aarschot, Belgium TEL: +32-16-550880 FAX: +32-16-550888 eurosales@imcnetworks.
