Datasheet

Networks
Ordering Information
4
IE-MultiWay
Managed Auto Cross
Auto
Negotiation
10/100/1000 Mbps Ethernet
Media/Mode Converter
Fiber Alert
FIBER
LOS
X
X
LINK
LINK
Link Loss
X
X
LOS
V-LAN
Tagging
T
T
T
858-11121
IE-MultiWay, 2TX/2SFP w/ AC to DC Power Adapter
Varies
854-11121
IE-MultiWay, 2TX/2SFP w/o AC to DC Power Adapter
Varies
806-39753
IE-Power/5V, AC to DC (DIN Rail) Power Adapter
(-20° to +70° C)
806-39105
DIN Rail Clip
806-39638
Double-USB Power Cable, 36”
825-39951
Serial Cable, MiniJack to DB9 (female)
895-39229
Wall Mount Bracket
Product Overview
The IE-MultiWay is a value-based, Carrier-class Ethernet, FTTx solution
that is ideal for use as a CPE device at the customer’s network edge
as well as in a fiber infrastructure. The IE-MultiWay comes standard
with two SFP uplink ports for the providers’ network connection and two
10/100/1000Base-T copper ports.
There are four distinct DIP Switch selectable configurations that
the IE-MultiWay supports. Among them are a 1+1 Uplink Protection
Switch, a 4-Port Switch, and a Dual Copper to Fiber SFP Media/Mode
Converter (two gigabit fiber media converters in one).
As a 4-port device, it can be employed with fiber redundancy (with or
without 1+1 uplink protection) and status monitoring with management
on all ports via OAM, for mission-critical applications. It also can be
deployed as a dual 10/100/1000 Mbps copper to fiber media converter
and be utilized as two separate converters.
The IE-MultiWay supports 10/100/1000 Mbps and 1 Gbps copper and
100 Mbps and 1 Gbps optical SFP modules, to provide greater flexibility
in the network environment. The hot-swappable nature of the SFPs and
the numerous fiber modes and types that are available allow for easy
configuration and future upgrading as network demands evolve. For
added control, DDMI is supported via the CLI for optical SFPs.
Local management is achieved through the serial port, which allows
users to launch a serial session through the CLI. Commands such as
interface statistics, RMON statistics, and OAM status and control are a
few of the accessible features.
The Most Compact, Versatile, Managed CPE
Ethernet FTTx Device on the Market.
Providing Solutions For:
• Managed Fiber Termination
• Fiber Drop & Insert
• Fiber Repeater
• Mode Conversion
• Dual Independent Media Conversion
Application Example
Conversion of copper to fiber optic cabling
for distance extension from the multi-tenant’s
dwelling to the ISP’s central office is commonly
used today. Data services are then distributed
through fiber optic cabling via copper to Clients
living in the building so Clients are able to gain
access to the internet at greater speeds. Using
IMC Networks’ IE-MultiWay dual media converter
option, ISP’s can support two independent fiber-
to-copper lines using a single device, saving
equipment cost while providing the Clients with
independent higher speed data services.
Available Accessories
Features
• Dual-independent copper to fiber SFP media
converter(s)
• Fiber repeater
• SFP to SFP mode converter with copper drops
(Re-amplify, Re-shape, Re-time)
• 4-Port Switch
• 1+1 uplink protection (< 50 mSec)
• Supports RMON Statistics
• Supports Jumbo Frames (up to 10240 bytes)
• -48V DC terminal for Telco applications
• Supports active and passive IEEE 802.3ah
• OAM (Operation, Administration &
Management) on all ports
• Supports DHCP
• Generates SNMP TRAPs based on events
• Discovery, Link Monitoring, Performance
Monitoring and Remote Loopback
• Remote firmware upgradeable
• RS-232 CLI (Command Line Interface) console
port
• User-friendly 10/100/1000 Mbps Auto
Negotiation technology
• Selectable (High/Low) SFP control via DIP
Switch
• Auto detect for 100 or 1000 optical SFPs
• Auto negotiate speed and flow control for
10/100/1000 copper SFP with SGMII
• Supports fixed speed 1 Gbps full-duplex copper
SFPs
• Optical SFPs support DDMI status through CLI
• Compatible with standard MSA compliant SFP
transceivers
• Extended temperature functionality, up to -40°
to +85° C
• Powering options can be combined for AC/DC
redundancy
Physical Specifications
Connectors:
RJ-45, SFP
Regulatory Approvals:
• FCC Class A (Using 48V Telco-type power)
• FCC Class B (Using all other power options)
• UL/cUL, CE
Operating Temperature:
+14° to +122° F (-10° to +50° C)
w/ Franmar AC Wall Adapter;
-40° to +185° F (-40° to +85° C)
w/ DC Configuration;
Storage Temperature:
-49° to +185° F (-45° to +85° C);
Humidity:
5 to 95% (non-condensing)
Altitude:
0 to 10,000 ft.
Dimensions
0.86”H x 3.66”W x 3.88”D (2.2 x 9.38 x 9.94 cm)
Supply Voltage:
5 to 24 VDC (Barrel)
48 VDC Telco (Terminal)
Power Information:*
Min: 3.15W (1 optic SFP [1 Gbps], 1 Tx [100 Mbps])
Max: 7.0W (2 Cu SFP [1 Gbps], 2 Tx [1 Gbps])
* Power consumption is based on SFP types
Shipping Weight:
1.0 lbs (0.45 kg)
Ordering Information
Last Gasp
Wall Mount Bracket