UP Spec Sheet

General Information
IMC Teddy 50 Ranick Drive East Amityville, NY 11701 [phone] [e-mail] www.imcteddy.com
UP-60 0919
UP
Pot/Pan/Utility, Louvered or Solid Shelving
Project Name:
Consultant:
Item #:
Model #:
Quantity:
Specications Product Guide Options
UP Pot/Pan/Utility System is pro-
duced from 16GA type 300 se-
ries stainless steel construction.
Shelf corners are fully welded,
ground and polished smooth. A
raised die-formed ledge encloses
a stainless steel gusset welded to
undersurface of shelf and tted
with two stainless steel screws
for shelf height adjustment.
Posts are 1⅝” OD tubes, 16GA
18-8 type 300 series, with top
caps, and sanitary, adjustable
stainless steel style feet. Units
and components to NSF ap-
proved and all exposed surfaces
nished brush satin.
UP Systems are used in an efcient
food service establishment. Pots,
pans, racks and others are quickly
transported between equipment
and stored when not in use.
Easily assembled and adjusted.
Solid surface design provides easy
access and quick clean up of spills.
Large louvers allow uniform tem-
perature distribution.
Stationary units provided with
stainless steel posi-grip adjustable
foot inserts.
Mobile units provided with 5” cast-
ers. See selection guide and infor-
mation.
□ RC-5 - 5’’ Rubber Casters - Standard
□ PCY-5 - 5’’ Poly Casters - Heavy
Duty
□ PCYS-5 - 5’’ S/S Poly Casters -
Heavy Duty
□ PPC-5 - 5’’ Plate Poly Casters -
Heavy Duty
□ GF-2 - Grease Fittings
□ FF-50 - S/S Flanged Feet
□ BAC - Brakes on All Casters
□ RB-10 - Revolving Bumpers
□ CBM-20 - Corner Bumpers
□ BF-40 - S/S Bullet Feet
□ AES - Aeroform Shelves
□ GA-12 - 12GA Upgrade
□ GA-14 - 14GA Upgrade
□ SRE-60 - Shelf Reinforcement (Solid
Only)
□ PLG-70 - Perimeter Ledge
□ SEI-80 - Seismic Earthquake
Shelving
□ WELD - Set-Up & Welded Unit
□ PCAP - Post Caps