SCS-2 Spec Sheet

General Information
Specications
Product Guide
SCS-2 Model Scullery Sinks are constructed of 14GA
or 16GA type 300 series stainless steel with single or
multi-compartment bowls and double wall separators.
Sinks are mounted on 16GA, 1⅝ stainless steel tubes
with stainless steel adjustable feet for leveling. Sink
bowls are coved at all corners and pitched to a 3½”
waste cutout.
Full length backsplash is 10” high and holes for faucets
8” on center accommodates your choice of faucets.
The entire unit is nished with a satin brush nish.
Drainboard extensions are separately supported with
stainless steel legs, as required.
IMC Scullery/Service Sinks Model “SCS” are designed
for heavy duty application in large or medium
Institutional Facilities or where constant use is likely.
Options available are designed to make this product
suitable in a variety of locations in the facility for
applications, such as Deli, Vegetable or Bakery sinks
or for pot cleaning.
DRAWINGS
IMC Teddy 50 Ranick Drive East Amityville, NY 11701 (800) 221-5644 info@imcteddy.com www.imcteddy.com
SCS-2 50 0318
SCS-2
2 Compartment Scullery Sink
Project Name:
Consultant:
Item #:
Model #:
Quantity:
Shown with Non-Flush
Front & Left & Right
Drainboards

Summary of content (2 pages)