Users Manual

Start / Stop custom code
Buzzer
RGB lights
Flip direction
Flip the forward direction as needed
Transferred codes in the hub can be
started or stopped by pressing this button
The Bluetooth signal will be on when
the Hub is successfully connected.
Buzz your buzzer. The Buzzer module
need to be connected.
Light up your RGB lights
underneath the hub.
Reset the servo to turn to its
original position (90°).
Reset servo
Servo control
Press to let servo rotate to its 0° position.
Press to let servo rotate to its 180° position.
Long pressing makes the servo rotate continuously.
Directional pad
Move the "Directional button" around
to control the motion of the Hub
6 preset motions of the Hub can
be activated instantly
Go back
Preset motions
Connect Hub