Technical Manual

TECHNICAL MANUAL
Page n°6 of 25
RF TRANSCEIVER MODULE 2.4GHz
B014
Doc. Revision°:0
Date: 11/01/2021
Technical Manual file.dot revisione n° 0 data: 24/02/2020
IMET s.r.l. Via Ronche, 93 33077 Sacile (PN) – ITALY – Tel. [phone] – Fax [phone] P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail: [e-mail]
1.1 Main technical Characteristics and Features
B014 RF module is a Long Range 2.4GHz transceiver ideal for robust and reliable wireless solution
and in particular for IMET radio remote control systems M880 series listed in the section 1.0 “Device
overview”;
The main technical characteristics are listed in the following table
B014 MAIN CHARACTERISTICS
• High receiver sensitive up to -117 dBm;
• Size: 51,18 x 66,25 x 6,50 mm (L x W x H with shield)
• Wight: 8.00 g (with Shield)
• Integrated crystal oscillator for RF and logic unit
• 2.4GHz ISM band transceiver
• Up to 38 channels available and selectable
• Wide band transceiver at 812kHz per channel
• Spread spectrum modulation with forward error correction (FEC)
technique to increase the range and robustness of the radio
communication. It is superior immunity to interference
• Internal voltage Regulator at 3.3 V with LDO (low Drop Out)
• Two External 50Ω Antenna Connector :Ultra Miniature Coaxial (U.FL),
50Ω
• Screw mounting in the IMET 51.18Remote control unit
• UART communication interface available
Table 1