User Manual

• If any, remove the batteries' isolating strips on the lid of the battery compartment (7)

or remove the protective sheets of the batteries and insert them by a placing the poles

correctly. If the scales does not display any funds from, remove the batteries and place

them back again. The LCD display (1) displays the content shown in the gure below.

• Close the battery compartment (7) and wait for the LCD display (1) to display the content below.

SELECTING THE UNIT OF MEASUREMENT

• Press the UNIT button (6) [Fig. 3] to select the unit of measurement (kg/st and cm/ft). Each

time it is pressed, the LCD display changes the unit of measurement shown (1):

SELECTING THE USER

• Press the USERS button (3) to activate the user selection mode. "P1" will start to ash on

the display.

• Press the USERS button (3) to switch to the next users - “P2”, “P3”, “P4”, “P5” - until your

reference number is displayed.