User Manual

• Step on the scales with bare feet and position yourself on the electrodes (metal part) as

shown in the gure below.

ATTENTION!

As well as positioning yourself on the electrodes (metal part) , it is important

to make sure that there is no contact between the legs and between your feet. If

necessary, place a sheet of paper between your legs.

• Stand still on the device, the weight is permanently displayed on the LCD (1) when this is

stable.

• The measurement will start automatically with the "o" signal that moves from left to right of

the LCD display (1).

• After the measurement has been taken, the results will be displayed in sequence for three

times, after which the scales will turn o automatically.