User Manual

www.immersionrc.com [e-mail]
ImmersionRC
600
mW 5.8GHz
Audio/video transmitter
Forget about
bulky
CCTV
transmitter modules
modified for FPV use
or
unreliable transmitters requiring elaborate cooling solutions. The
ImmersionRC 600mW 5.8GHz audio/video transmitter is designed
specifically for FPV use by ImmersionRC, and thus it is backed by a
manufacturer with years of experience flying FPV and designing FPV
specific products that are built to last.
ImmersionRC's 600mW 5.8GHz audio/video transmitter is engineered to
offer a level of performance, reliability and flexibility you won’t find
elsewhere. It is a self contained audio/video transmitter that just needs
an input voltage of 6-25V to power it. A 5V camera can be connected
directly as the audio/video transmitter provides clean, noise free 5V
power output, so establishing a working wireless audio/video link only
requires the ImmersionRC 600mW 5.8GHz audio/video transmitter, a 6-
25V power source and a suitable 5V camera. Alternatively a 12V camera
can also be used when teamed up with the ImmersionRC 5V to 12V step-
up regulator.
The ImmersionRC600mW 5.8GHz audio/video transmitter was designed
with an eye for every detail. It features robust and durable locking
connectors so forget about connectors that work themselves lose during a
flight. Another important part of the design is the super quiet, high
efficiency regulator that has zero interference with your video image, or
any other sensitive RC equipment. Adding to that is its diminutive size and
the fact that it consumes a mere 3W and doesn't need an elaborate
cooling solution makes it ideal for all your FPV applications.
ImmersionRC – Real Virtuality
 600mW (+28dBm) typical output
power
 6-25V input voltage, 2S-6S LiPo
compatible
 Typical power consumption of just
3W at any input voltage
 Super-quiet, high efficiency
switching regulator
 Small, light weight, all-in-one A/V
transmitter solution
 Robust and durable locking
connectors
 5V power output, ideal for
powering cameras
 No interference with sensitive RC
equipment by design
 High bandwidth video
 High bandwidth stereo-audio
 Composite video input at 1Vpp/75
ohm
 Two sets of A/V connectors, for
easy patch-in of an audio source
 7 channels (5740, 5760, 5780,
5800, 5820, 5840, 5860), PLL
synthesized
 FM Audio/Video Modulation
 50 ohm antenna impedance.
 Weight: 18-grams.
 Size : 50 x 23 x 15 mm.
 Requires airflow for cooling, do
not mount in an enclosed area
 Must be used with an antenna at
all times
 May require a license to operate