User Manual

Power On/Off
Automatic
• Turn on: take the earphones out of the
charging case.
• Turn off: place the earphones back in
the case.
Manual
• Turn on: press for 2 seconds.
• Turn off: press for 5 seconds.
Note
When the earphones are not connected to any
Bluetooth-compatible device for 3 minutes, they
will automatically turn off.
ENEN
Bluetooth Pairing
First use
1. Turn on the earphones. The two earphones will
automatically connect to each other and go into
pairing mode. In pairing mode, the LED indicator on
one of the earphones will flash red and blue, while
the LED indicator on the other earphone will stop
flashing.
2. Make sure the Bluetooth function on your smart-
phone (or another compatible device) is activated.
3. Select “iMoshion TWS-i2” from the phone’s list of
available Bluetooth devices.
Automatic pairing
After they have been manually paired to a device, the
earphones will automatically connect to it every time
they are turned on provided the device is within their
Bluetooth range and its Bluetooth function is on.