User Manual

FM Transmitter
with display
USER’S MANUAL
Features： Product Diagram: Bluetooth Operation Instruction:
Auto-connect:
Operations:
Tips:
Aux in:
1. Transmit the music from micro SD card (Up to 32G)
to car stereo via FM signal, you can scan and
select folder or music from your micro SD card,
and choose the loop mode you like.
2. Transmit the music/navigation of your Bluetooth
enabled smart device to car stereo via FM signal.
3. Transmit music to car stereo via 3.5mm AUX port.
4. Answer hands-free phone calls during driving.
5. QC3.0 port and 5V 2.4A port for charging
devices fast.
6. 1.8 inches TFT color display screen, display mode,
volume, FM frequency, car voltage, song names
from micro SD card, caller ID when connected
to phone.
7. Play lossless music from micro SD card.
8. 5 EQ modes to choose from: Normal, Classical,
Pop, Rock, Jazz.
1. Plug the transmitter into your car charger port, the
Bluetooth icon on the display flashes means it is in
pairing mode.
2. Turn on the Bluetooth function of your smart device,
search for Bluetooth devices and connect
iMoshion FMT2.
3. If pairing is successful, the Bluetooth icon will stop
flash and the display shows the name of connected
device.
4. Tune the car FM radio to a blank FM station from
87.5MHz to 108.0MHz.
5. Tune the FM transmitter into the same frequency
with the car FM radio.
6. Open the music player/navigation of your smart
device, now it can transmit the phone calls, music
or navigation to car stereo system.
1. For the best audio quality, please turn the volume of
your smart device and FM transmitter into the
max level.
2. The signal of any FM transmitter sometimes can be
interfered by the surrounded radio or the similar
frequency signal thus cause noise, this is normal.
3. If the noise is too loud, please try another blank
FM station.
4. If there’s no blank FM station, and your car has an
AUX in port, then you can use the AUX out function
with the provided 3.5mm audio cable.
5. To prevent your car battery from being drained,
please remove the product from the car charger
port after use.
Play Music from micro SD card: CORRECT DISPOSAL OF THIS PRODUCT
1. Tune the car FM radio to a blank FM station.
2. Tune the FM transmitter into the same frequency
with the car FM radio.
3. Insert the micro SD card into the device, it will
automatically detect and play the MP3/WMA/
FLAC/WAV format music.
4. In this mode, you can long press "Mode" button for
2 seconds to select folder and music, play mode,
EQ mode. Press "Next"/“Previous” button to select,
"Mode" button to confirm, "CH" button to exit.
(1). Play mode include: Repeat all, Repeat folder,
Repeat one, Random.
(2). EQ mode include: Normal, Classical, Pop, Rock, Jazz.
Aux out:
If you can’t find a blank station, and there is too much
noise when streaming music through FM signal，you
can use the 3.5mm audio cable to transmit music
through Bluetooth/micro SD card only if your car has
aux in port.
1. Plug in your micro SD card, or pair the product with
your Bluetooth enabled device.
2. Plug the 3.5mm audio cable into your car aux in
port and the transmitter.
3. Now it can transmit music from your micro SD
card/Bluetooth enabled device to car stereo.
If your device doesn’t support Bluetooth function, you
can use the 3.5mm audio cable to connect your device
with the product, then stream the music of your device
through FM signal to car stereo.
1. Tune the car FM radio to a blank FM station.
2. Tune the FM transmitter into the same frequency
with the car FM radio.
3. Use the 3.5mm audio cable to connect your device
with the product.
4. Now it can transmit music from your device to
car stereo.
Previous
Micro SD card port
Multifunction button (MFB)
CH (Frequency)
Display screen
Microphone
AUX port
Mode
5V 2.4A charging port
QC3.0 port
Next
Volume
FM station
Music name
Music spectrum
Music amount
Music serial number
Music time
Car voltage
micro SD card Mode
Bluetooth Mode
Volume
FM station
Bluetooth name
Connected device’s name
Music spectrum
Car voltage
Bluetooth Mode
micro SD card Mode
i Mo s h i o n F MT 2
EQ mode
Play mode
Play time
Play status
Function Operation
Play/Pause/Answer/
Hang up
Frequency Up/Down
Switch music source
Reject a call
Redial the last number
Volume Up/Down
Next/Previous Song
Power On/Off
Plug/Unplug the transmitter into/out from
your car charger port
Long press the "MFB", then rotate the
“MFB” or press the "Next"/“Previous”
button to add/reduce frequency
Press the “MFB” once
Long press the “MFB” for about 2 seconds
Press the “MFB” twice
Rotate the “MFB”
Press the "Next"/“Previous” button once
Press the "Mode" button to switch
from Bluetooth, micro SD card music,
when switch to Bluetooth music, you
have to press “MFB” to start the music
The transmitter will auto-connect the last connected
device when turned on next time. (Please turn on the
Bluetooth function of your smart device before turn
on the transmitter.)
(WasteElectrical & ElectronicEquipment)
This marking. shown on the product or its
literature, indicates that it should not be
disposed with other household wastes at the end of its
working life. To prevent possible harm to the
environment or human health from uncontrolled waste
disposal, please separate this from other types of
wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household user should contact either the retailer
where they purchased this product or their local
government office for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check
the terms and conditions of the purchase contract.
This product should not be mixed with other
commercial wastes for disposal.
Model name: iMoshion FMT2