A4236 Light Kit Bag #2 INSTRUCTIONS
Introduction Thank you for choosing Impact. The Impact A4236 is a lightweight, sturdy, and durable case that is ideal for any application where delicate and bulky lighting equipment needs to be safely transported or stored. This roomy bag has the capacity to fit three monolight strobes and reflectors, as well as quartz or LED lights. The inner lid secures the lights and provides enough space to hold up to four light stands along with umbrellas, softboxes, or any gear you need to transport to your shoot.
Dual handles are easily lengthened to convert into dual shoulder straps. And the bottom of the bag features three rubber feet for added protection when placing the bag on the ground. The bag folds down to a quarter of its height for convenient storage and easy setup. Precautions ⚠ • Please read and follow these instructions, and keep this manual in a safe place. • Clean the unit with a soft, dry cloth. • Make sure the item is intact and that there are no missing parts.
Overview 1 Light Kit Bag 2 Adjustable dual handles/shoulder strap 3 Large internal dividers (4) 4 Small internal dividers (2) 5 Bottom panel 6 Inner lid 2 1 3 5 6 4 4
Assembly Instructions 1 2 1. Open the bag and remove all the contents. 2. Insert the bottom panel so it lays flat on the bottom of the bag. 1 3. Insert the internal dividers according to your needs. Press the touch fastener strips on the sides of the dividers to the cotton interior lining of the bag to hold them in position. 2 Note: It’s recommended to space the large internal dividers far enough apart so they can support the inner lid.
3 4. 6 4 Place the inner lid over the dividers and press the touchfastener strips to the sides of the cotton interior lining. 3 5. Zip up the bag and adjust the length of the handles as needed. When fully extended, the handles become a shoulder strap. 4 Use the handle wrap as a shoulder pad.
Specifications Specifications Outer shell material Water-resistant nylon Interior lining material Cotton tricot Type of closure Dual zippers Folded dimensions (H × W × D) 3.5″ × 34.5″ × 13″ (9 × 87.6 × 33 cm) Exterior dimensions (H × W × D) 14″ × 34.5″ × 13″ (35.6 × 87.6 × 33 cm) Interior dimensions (H × W × D) 13.5″ × 34″ × 12″ (34.3 × 86.4 × 30.5 cm) Carrying/transport options Dual 2″ wide strap handles with wrap that convert to shoulder straps Weight 5.75 lb. (2.
One-Year Limited Warranty This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
