ADCD-500-BT Rechargeable Battery for ACDC-500-TTL Monolight QUICK-START GUIDE
Precautions • Do not attempt to disassemble, open, or repair this product. • Do not dispose of this product in fire or water. • Do not store above 140°F (60°C). • Do not puncture, short, or crush the external contacts. • Images are for illustrative purposes only. 2 Battery type Li-ion Voltage 14.4 V No. of flashes @ full power 350 Charging time (approximate) 3 hr. Charger Input: AC 100 to 240 V, 50/60 Hz Output: DC 16.8 V, 2.5 A Overheat limit 140°F (60°C) Dimensions 3.7 × 4.2 × 2.6 in. (9.
Charging and Installing the Battery Use the multivoltage charger that’s included with the Cruiser TTL 500. Note: Impact recommends fully charging the battery before its initial use and after an extended period of inactivity (more than two months). To charge and then install the battery, follow these steps: 1. Plug the AC cord into a wall outlet. The charger’s indicator light will glow green when the charger is receiving power. 2. Connect the DC cord to the battery.
One-Year Limited Warranty This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
