User Manual
15
Mounting on a Light Stand
The Cruiser TTL-500 features a 5/8-inch baby receiver. If your light stand or
mounting plate does not have a 5/8-inch post, make sure to use the appropriate
adapter to mount the Cruiser.
1. Set the 5/8-inch baby receiver onto your light stand's mounting pin, and
tighten the locking screw until secure.
2. Adjust the angle, and then secure it with the tilt lock.
Attaching the Reector
The Cruiser is equipped with a S-Mount to let you add light modiers like the
included reector, as well as softboxes and other light-shaping attachments.
1. Remove the protective cap by pulling back the accessory release button
and turning the cap counterclockwise.
2. To attach the reector, align the three studs on
the reector with the three mounting slots on the
ash head.
3. Press the reector in, and turn clockwise until
the reector clicks into place.
Preparing for Use