User Manual

Getting Started

1 2

To install the reﬂector, follow these steps:

1� Align the three pegs on the reﬂector with the corresponding notches in the

monolight’s bayonet accessory mount�

Note: Make sure the reﬂector’s umbrella hole is aligned with the monolight’s

umbrella mount, located next to the accessory release latch�

2� Insert the reﬂector into the accessory mount and rotate the reﬂector clockwise

until it locks into place�

To plug in the Astral Extreme, follow these steps:

1� Make sure the power switch is set to the Off position�

2� Plug the AC power cord into the monolight’s AC power socket and then into an AC

power outlet�

The Astral Extreme runs on the standard 110 V AC, 60 Hz voltage and comes with a

grounded AC power cord�