User Manual

Replacing Parts

6� Insert a fresh FT-X-400 ﬂashtube into the ﬂashtube socket�

7� Wrap the metal wire around the clip that holds the ﬂashtube in place� The wire does

not need to be in the exact position as before, but it does need to connect the two

ends of the clip�

8� Reinstall the modeling lamp, glass dome, and reﬂector�

Replacing the Fuse

The Astral Extreme’s user-replaceable fuse

protects the ﬂash unit’s circuitry� The fuse and

included spare are located in a bay mounted

above the AC plug (A)�

To replace the fuse, follow these

steps:

1� Turn off the Astral Extreme by pressing

the power switch to the Off position�

2� Unplug the AC power cable from the

monolight’s AC power socket�

3� Use a ﬂat-head screwdriver or needle-

nose pliers to remove the fuse bay�

4� Remove the old fuse (B) and replace it

with the spare (C)�

5� Reinsert the fuse bay into the monolight�