DLS Series Digital Light Shed INSTRUCTIONS
Introduction Thank you for choosing Impact. This tabletop shooting enclosure features a high-quality translucent cloth material housing, perfect for photographing jewelry, glassware, and other highly reflective objects. It’s also perfect for generating consistently illuminated images for catalogs or e-commerce. The translucent material will dramatically reduce unwanted reflections and give you soft, nearly shadowless lighting.
Features • Lighting is made simple and efficient, taking less time than conventional lighting solutions • Portable with easy setup and breakdown • Dual zippered front and side panels for camera lens positioning • Bottom panel peels back on all four sides for easy positioning of objects inside Box Contents: • Shooting enclosure • Two translucent bases • White fabric sweep • Black fabric sweep • Storage bag • User manual 3
Setting Up Your Digital Light Shed 1 Remove the digital light shed from its storage bag. 4 The light shed is now open halfway. 4 2 The sides of the light shed are folded together into layers. 5 Grab an inside corner and pull out. 3 Peel one layer from the other as if you were opening a book. 6 The light shed will pop open completely.
7 Peel the touch fastener cover away from the opening. This opening gives you access to set up the scene inside the shed. 10 The sweeps can be secured at the touch-fastener corners. 8 Inside the digital light shed are two translucent surfaces, which you can use as a base or background for your scene. 11 You can remove the cover completely and place the light shed over your scene. Or light your scene through a translucent tabletop.
Setting Up Your Digital Light Shed (continued) 13 The dual zippers allow you to place the camera high, low, or in the middle of the light shed. 16 Take the shot. Note the soft shadows and the absence of distracting reflections in the chrome. 6 14 Turn the light shed on its side to shoot wider scenes. Keep the opening closed to minimize reflections. 15 You can shoot through the smaller opening on the end of the light shed if you want a deeper scene.
Breaking Down Your Digital Light Shed 1 2 To fold the light shed, push one edge of the shed to the opposite edge. 3 Continue folding until one side lies flat. Fold the standing side onto the flat side. Your digital light shed is now ready to go back into its protective carry bag. Specifications Dimensions Weight DLS-S 10.5 × 10.5 × 13.5 in. (27 × 27 × 34 cm) 1 lb. (0.45 kg) DLS-M 15 × 15 × 23 in. (38 × 38 × 58 cm) 2.4 lb. (1.11 kg) DLS-L 18 × 18 × 27.5 in. (46 × 46 × 70 cm) 3.2 lb. (1.
One-Year Limited Warranty This IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.