SR-SHOE-D Speed Ring Instructions
Introduction The Impact SR-SHOE-D Speed Ring for Dual Shoe Mount Flashes offers a portable solution to achieve beautiful, soft lighting with equipment that you already own. It mounts up to two speedlights and radio receivers for optimal power and efficient recycle time, and accommodates a small- to medium-size rectangular, square, strip, or octagonal softbox to control and shape your light.
Overview A B 1 C 6 2 7 8 9 4 3 5 A. Speed Ring: B. L Bracket 1. 2. 3. 4. 5. 6. C. Flash Bracket: Softbox rod mounts L-bracket mount Locking knob Ratchet handle Mounting socket L Bracket thumbscrew 7. 8. 9. Shoe mounts (×4) Small thumbscrews (×4) Large thumbscrews (×5) Also Included: User manual Specifications • Mounting socket: 5/8″ (16 mm) • Dimensions (H × W × D): 12″ × 7.5″ × 10″ (30.5 × 19 × 25.4 cm) • Weight: 3 lb. (1.
Assembling the Speed Ring Installing One Speedlight You can use the SR-SHOE-D with a single speedlight and radio remote by mounting them directly to the L bracket. To assemble the SR-SHOE-D for a single speedlight, follow these steps: 1. Mount your softbox onto the speed ring by inserting your softbox’s rods into the corresponding labeled rod mounts (for more information on this, refer to your softbox’s instruction manual). 2.
Fig. 1 Fig. 2 Fig.
Assembling the Speed Ring Installing Two Speedlights For greater flash power and faster recycle times, you can mount two speedlights and radio remotes to the flash bracket. To assemble the SR-SHOE-D for two speedlights, follow these steps: 1. Mount your softbox onto the speed ring by inserting your softbox’s rods into the corresponding labeled rod mounts (for more information on this, refer to your softbox’s instruction manual). 2.
Making Adjustments Rotating Your Softbox The SR-SHOE-D’s outer ring rotates 360°, so you can change your softbox’s orientation while shooting. To change the orientation of your softbox, carefully rotate the outer ring to the desired angle. The outer ring’s self-locking feature will hold the softbox in its new position. Adjusting the Tilt You can adjust the tilt of the speed ring assembly by loosening the ratchet handle.
One-Year Limited Warranty This IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
