User Manual
Page 12 Page 9
10M 25M 50M 75M 100M 10Y 25Y 50Y 75Y 100Y
Use of Softboxes (Continued)
Umbrellas
An umbrella with a handle diameter of up to 9mm can be secured in the umbrella holder.
Firmly press the umbrella shaft through the holder. The locking knob is located beneath
the holder. Do not overtighten to avoid damaging the shaft of the umbrella. The reξector
supplied with the Impact EX-100A features a slot through which you can feed the umbrella
shaft. Be sure to install the reξector with the slot at the bottom.
Use of Umbrellas
The front diffuser attaches to touch
fasteners on the outside edge of the
softbox skin.
After youβve attached the touch fasteners
on all four sides, pull the corners of the
diffuser over the corners of the softbox.
Mount your softbox onto the monolight.
Line up the notches with the white marks,
push in and turn clockwise until it locks.
Youβre ready to shoot. You can angle the
softbox by releasing the locking arm.
Adjust positioning, then lock it back down.
9
11 12
10