User Manual
4
Assembling the Octa Softbox 24 with the FF-OF4
Fluorescent 4-socket xture
Note: light stands, light xtures, and bulbs are not included with this softbox
unless purchased as a kit.
1. Before assembling the FF-
OSB60 Octa Softbox, unplug
the FF-OF4 and remove all
uorescent lamps.
2. Unfold the softbox and run
the power cord of the FF-OF4
through the center of the
softbox from the inside out.
Position the retracted FF-OF4
inside the softbox and rst
move the locking knob and
receiver assembly through the
elastic ring. Then t the elastic
ring of the softbox around the
base of the xture. Make sure
that the ex rod sockets are
accessible from the inside of
the softbox.
Assembly Instructions