User Manual
7
Disassembly Instructions
Recommended Accessories
1. Turn off the power to your light
xture and disconnect the power
cord from the power supply.
2. Remove the diffuser from the
softbox.
3. After the bulbs have cooled off,
remove them from the xture.
4. Unmount the xture from the light
stand.
5. Bend one of the ex rods to release
it from the pocket and then from
the ex rod socket. You will have to
rmly bend the ex rod to release it.
6. The next ex rod to remove should
be the one directly opposite the rst
one removed.
7. Remove the remaining ex rods.
8. Return all softbox items to the
carry bag.
Impact FF-OF4 Octa 4 Socket Fluorescent Fixture
The Impact FF-OF4 is a compact and portable lighting xture that uses four CFL
bulbs up to 105W per socket. The FF-OF4 mounts on any 5/8” stud, and two light
switches provide control over your light source. The built-in umbrella socket
and locking tilt knob provide even more lighting options. And with the multi-
voltage circuitry (100~240V/50/60 Hz) you can plug in the FF-OF4 anywhere.
Impact LS-8A Light Stand
The Impact LS-8A Light Stand is one of the most economical light stands
available. It extends to a maximum height of 8’ and has a standard 5/8” stud
on top with a ¼”-20 thread.
Other Accessories
• Impact Swivel Umbrella Adapter (CA-108)
• Impact Super Clamp with T-Handle (CC-106T)
• Impact 3 Section Double Articulated Arm without Bracket (BHE-119)
• Impact Combo Boom Stand – 12.95’ (LS-CB6)
• Impact Double Ball Joint Head (CC-131)
• Impact Holder for Collapsible Reectors (ME-109)