Bulbs are not included.
Precautions ⚠⚡ • • • • • • • • 2 Please read and follow these instructions and keep this manual in a safe place Keep this product away from water and any flammable gases or liquids. Use only the correct, recommended voltage. Do not attempt to disassemble or repair this product, since doing so could cause shock. It will also void the warranty. Clean this product with only a soft, dry cloth. Keep this product away from children. Make sure that this product is intact and that there are no missing parts.
Introduction Thank you for choosing the Impact FF-OF4 Octa 4-socket fluorescent fixture; a compact and portable lighting fixture that uses Edison-base compact fluorescent lamps (CFL) up to 85 W per socket. It is ideal to use when a soft and diffuse light source is needed. When fitted with the Octa Softbox FF-OSB60; the FF-OF4 will also provide excellent round catch-light lighting.
Overview 5 1 3 6 2 7 8 4 Front view: Back view: 1. 2. 3. 4. 5. 6. 7. 8. Sockets (4) Umbrella socket Handle Locking mount knob Flex rod sockets (8) Power switches (2) Fuse Locking tilt knob Warning: Use only spiral fluorescent bulbs. Do not exceed 105 W CFL in any socket. Maximum of 85 W CFL bulb is recommended for each socket in a 4-bulb operation.
Instructions - Install the lights Important: The FF-OF4 should only be used with CFLs. Do not use incandescent bulbs in this fixture. 1. Screw each bulb into a light socket. Only touch the base of the bulb; never touch the glass itself. Mounting on a light stand 1. Loosen the locking mount knob at the bottom of the fixture and insert the fixture onto the light stand. 2. Tighten the locking knob and make sure the fixture is securely attached to the light stand. 3.
Operating the lights 1. Each power switch on the back panel operates two bulbs. Switch one or both of them to the ON position according to your lighting needs. Changing the fuse 1. 2. 6 Using a small slotted or Phillips head screwdriver, turn the fuse holder a quarter-turn counterclockwise. The fuse holder will pop out of the fuse socket. Remove the fuse holder from the back panel and remove the old fuse. 3. Insert the replacement fuse into the fuse holder and inset it back into the fuse socket.
Recommended Accessories Impact Octa Softbox FF-OSB60 The Impact Softbox for FF-OF4 is a 24” (60 mm) softbox with a removable front diffuser that supplies soft, uniform, and diffuse light and also provides round catch-light lighting. Impact LS-8A Light Stand The Impact LS-8A Light Stand is one of the most economical light stands available. It extends to a maximum height of 8’ and has a standard 5/8” stud on top with a ¼”-20 thread.
One-Year Limited Warranty This IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.