User Manual

6
Assembly Instructions
1. Remove the softbox and the
ash bracket from the carrying
case.
2. Open the softbox by securing
the ex rods in place. Simply
push back each ex rod into
it's individual slot. You will
hear a clicking sound as you
push each ex rod into place.
Continue by securing opposite
rods rather than adjacent
ones until all six ex rods are
secured.
3. Insert the ash bracket rods
into the ash bracket mounts
on the rear of the softbox.
Adjust how far in the rods go
based on the height of your
ash unit and any accessories
to which it may be attached.
4. Turn the ash bracket
tightening knobs clockwise
until secure.