User Manual

Thank you for choosing Impact.

This ﬂash cable is made with high-quality, wear-

resistant insulated wires. It connects your battery

pack to your ﬂash. The mechanism ensures a

secure connection between the battery pack and

the cable. This cable is compatible with major

battery pack brands, including Impact, Bolt,

Quantum, Lumedyne, and Dynalite.

Precautions

• Use only as instructed. Both terminal connectors

output high voltage.

• Connect your ﬂash unit to your battery pack only

with a cable that is compatible with both.

• Do not use if any wire is exposed as a result of

damage or wear.

• Keep out of reach of children.

• Make sure the cable is ﬁrmly connected at both

ends when using your battery pack.

• Unplug this cable from the sockets on the

battery pack and ﬂash unit when it is not in use.

Plugging in the Cable

1. Plug the 5-pin metal

connector of the cable rmly

into the output socket on your

battery.

2. Plug the other end of the

cable securely into the

compatible power port on

your ash unit.

3. For battery packs with

compatible locking collars

such as those from Bolt

and Quantum Instruments,

you can lock the cable into

the socket to secure the

connection. To take advantage

of this feature, make sure the

cable is fully seated in the

socket, and then rotate the

battery pack’s locking collar

to the locked position.

Flash Cable Instructions

PAGE 1
Flash Cable Instructions Thank you for choosing Impact. Plugging in the Cable This flash cable is made with high-quality, wearresistant insulated wires. It connects your battery pack to your flash. The mechanism ensures a secure connection between the battery pack and the cable. This cable is compatible with major battery pack brands, including Impact, Bolt, Quantum, Lumedyne, and Dynalite. 1. P lug the 5-pin metal connector of the cable firmly into the output socket on your battery.
PAGE 2
Flash Cable Instructions For use with other battery pack brands, follow the instructions provided by the battery pack manufacturer. Important! Load your flash unit with its standard batteries before connecting it to your battery pack. Most compatible flash units require the standard batteries to be installed in order to power the computer functions that allow the flash to work.