LS-CB6 Combo Boom Stand 12.95 ft.
Introduction Thank you for your purchase of this sturdy, versatile Impact LS-CB6 Combo Boom Stand. This convertible aluminum light stand/boom stand provides rock-solid support and allows you to put your light exactly where you want it to be. The top of the Combo Boom Stand can be swiveled out and used as a boom arm, with a usable boom length of 46-84 in. It can support as much as 6.5 lbs with the boom extended to 60 in.
Height Adjustment Correct Incorrect T-locks The height of the light stand can be adjusted by extending the individual sections – simply loosen the T-lock and extend or retract the section to the desired position, then tighten the lock. When raising to the maximum height, do not withdraw the boom section riser completely from its lower section – keep the silver collar at the end of the boom riser in the stand section at all times.
Using the Boom Stand To use the Combo Boom as a boom stand: Set up the stand. Loosen the T-lock for the second section (from the top). Loosen the ratchet handle that controls the angle of the boom. Lift the upper section of the stand straight up until the bottom of the section is exposed. Angle the section to the desired position and tighten the ratchet handle. To extend the boom arm, loosen the topmost T-lock, pull the section out to the desired length, and tighten the T-lock securely.
Counterweight Always use a counterweight with the boom arm. When mounting a light on the boom, make certain that the ratchet handle controlling the angle of the boom is tightened. Start with the boom at its shortest length and support the boom with one hand, so that the boom won’t fall from the added weight. After the light is mounted, extend the boom slowly, being certain that you have enough counterweight on the opposite end of the boom.
Mounting the Head The boom arm includes a reversible mounting stud with a 1/4” screw on one end and a 3/8” screw on the other, allowing you to mount light heads or other accessories. For additional stability, the Combo Boom Stand has a T-lock at the bottom of the center riser. If this is loosened, the center riser can be lowered to rest directly on the floor or the ground, giving you a fourth leg for increased balance and security for your light stand or boom.
Warnings ⚠ Specifications Minimum Height: Maximum Height: Folded Length: Boom Length (Extended): Weight: Leg Diameter: Maximum Load Capacity, Stand: Maximum Load With Boom at 60 in.: Maximum Load With Boom at 75 in.: Air Cushioned: Accepts Wheels: Materials: 51.9 in. (131.8 cm) 12.95 ft. (3.95 m) 45 in. (114.3 cm) 84 in. (213.3 cm) 6.6 lb. (3.0 kg) with no counterweight 22mm 25 lb. (11.34 kg) 6.5 lb. (3.0 kg) • Please read and follow these instructions and keep this manual in a safe place.
One-Year Limited Warranty This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
