LS-CL40M Series 40 in.
Introduction Thank you for choosing Impact. Impact’s C-stand features a 40-inch double riser. The C-stand is constructed with oversized steel tubing for maximum rigidity and strength to hold light fixtures and accessories up to 22 pounds. This sliding-leg model has a movable top leg that’s designed for leveling the stand on uneven surfaces like stairs or a curb. Impact’s unique quick-release leg lock simplifies opening and closing the legs for rapid deployment and breakdown.
Precautions ⚠ • Please read and follow these instructions, and keep this manual in a safe place. • Make sure that this product is intact and that there are no missing parts. • Do not exceed the maximum load capacity. • Use caution when operating this product with the maximum load capacity. • Make sure all connections and locking knobs are secure before proceeding. • Always use sandbags.
Setup Setting Up the Legs To open the legs 1. Hold the C-stand with the legs facing up and to the right. 1 2. Loosen the locking knob, and rotate the C-stand clockwise, just until gravity takes over and the legs open. 3. Retighten the locking knob.
To close the legs 1. Hold the C-stand with the top leg facing up. 1 2. Loosen the locking knob, and rotate the C-stand counterclockwise, just until gravity takes over and the legs close automatically. 3. Retighten the locking knob. 2 Using the Sliding Leg The sliding leg adjusts the C-stand’s vertical alignment on an uneven surface like a hill, stairs, or curb. 1. Loosen the sliding leg’s locking knob. 2.
Attaching the Grip Head Loosen the locking handle, and place the grip head’s baby receiver over the baby pin. Then tighten the locking handle until secure. Attaching the Grip Arm 1. Face the grip head’s T-handle, and loosen the T-handle. 2. Make sure the 5/8-inch hole is on top of the T-handle. Insert the grip arm with the load to the right of the grip head. 3. Tighten the T-handle until secure.
Specifications C-stand Load Capacity Mounting Options Maximum Working Height Minimum Working Height Closed Length Footprint Diameter Leveling Leg Finish Construction Material Weight 22 lb. (10 kg) 5/8 in. stud 10.3 ft. (312 cm) 4.3 ft. (131.5 cm) 4.3 ft. (131.5 cm) 37.4 in. (95 cm) Yes Chrome / Matte black Steel 14.8 lb. (6.7 kg) Grip Head Number of Heads Compatible Diameters Bottom Mount Construction Material Finish Head Diameter Weight Single grip 5/8, 1/2, 3/8 in. 5/8 in.
One-Year Limited Warranty This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
