User's Manual

Attaching the Grip Head

Loosen the locking handle, and place the grip head’s

baby receiver over the baby pin. Then tighten the

locking handle until secure.

Attaching the Grip Arm

1. Face the grip head’s T-handle, and loosen the

T-handle.

2. Make sure the 5/8-inch hole is on top of the

T-handle. Insert the grip arm with the load to the

right of the grip head.

3. Tighten the T-handle until secure.

Important! Make sure the T-handles faces you, the arm is inserted through the

top of the grip, and the load is on the right side of the T-handle. This will prevent

the T-handle from accidentally loosening.