User Manual

2
Introduction
Thank you for choosing Impact.
The Impact wall-mounted boom arm offers a quick and safe way to
mount a light or camera without setting up light stands or taking up
valuable floor space.
Heavy-duty aluminum tubes allow the boom arm to extend from
3.9' to 7' while supporting a load of up to 12 lb. A 5/8" socket at
the end of the arm holds a reversible stud with 1/4" and 3/8" male
threads. When fully extended, the arm offers pan and tilt movement
of 180° for precise light or camera positioning. To avoid clutter or
obstructions when the boom arm is not in use, it can be tucked
away flush against the wall in its fully upright or down position.
Contents Include
• Telescoping boom arm
• 5/8" stud with reversible
1/4"-20 and 3/8" male
threads
• Removable cable clip
• Hex key
• Mounting hardware
• Mounting instructions