User's Manual

Setup

Attaching the Wheels and Setting the Legs

1. Make sure the wheel locks are in the locked

position by pressing down on the tab marked “On.”

2. Once the wheels are locked, screw them into the

legs.

3. Pull the spring-loaded leg locks to free the legs, and

unfold the legs until they lock into place.

For uneven surfaces, adjust the leveling leg screw by

inserting a hex key or a screwdriver into the hole and

turning to adjust the leg height until the base is stable.

Once the wheels are attached, the wheel locks can

be operated by foot. To unlock the wheels, step on the

Off tab at the top of each wheel. Lock the wheels by

stepping down on the On tab.

Assembling the Stand

1. Squeeze the pistol grip and slide the arm over the

main column. Release the pistol grip to engage

the brake. Slide it down far enough so it doesn’t

obstruct the hole in the main column.