User Manual

Contents

• 9.5’ Steel Roller

• Braking Wheels (×3)

• Socket Screws (×3)

• Hex Nuts (×3)

• Allen Key

• Combination Wrench

• One-year limited warranty

Attaching the wheels to the stand

1. Fit the wheel cap over the

end of the leg so that the

wheel faces inward. Make

sure that the cut-out slot of

the wheel cap is aligned with

the screw holes on the leg.

2. Insert the socket screw

completely through the hole

and turn the hex nut onto

the end of the screw on the

opposite side of the leg.

3. Hold the hex nut in place

with the included open-end

wrench and tighten the screw

with the included Allen key

until it is secure.

User Instructions

Speciﬁcations

Construction

Chrome-plated steel column and legs, aluminum alloy risers

Maximum Load 27 lb. (12.25 kg)

Minimum Height 4’ (1.2 m)

Maximum Height 9.5’ (2.9 m)

Closed Length 3.9’ (1.2 m)

Footprint Diameter 3.3’ (1 m)

Riser 2 risers, 3 sections

Column / Riser Diameters

1.4”, 1.2”, 1” (35, 30, 25 mm)

Leg Design 0.79” (20 mm) square

Attachment Size 5/8" (16 mm) baby stud

Air Cushioned No

Weight 13 lb. (5.9 kg)

PAGE 1
User Instructions Contents • • • • • • • 9.5’ Steel Roller Braking Wheels (×3) Socket Screws (×3) Hex Nuts (×3) Allen Key Combination Wrench One-year limited warranty Specifications Construction Chrome-plated steel column and legs, aluminum alloy risers Maximum Load 27 lb. (12.25 kg) Minimum Height 4’ (1.2 m) Maximum Height 9.5’ (2.9 m) Closed Length 3.9’ (1.2 m) Footprint Diameter 3.3’ (1 m) Riser 2 risers, 3 sections Column / Riser Diameters 1.4”, 1.2”, 1” (35, 30, 25 mm) Leg Design 0.
PAGE 2
One-Year Limited Warranty One-Year Limited Warranty This IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.