PLB-400 Pro Photo LED Booth with Dimmer INSTRUCTIONS
Introduction Thank you for choosing Impact. Impact’s PLB-400 portable LED photo booth is ideal for shooting large products, apparel, and portraits. It’s designed to provide the flexibility photographers need to create professional, shadowless images. The booth is lined with reflective, textured silver fabric for dramatic specular lighting, and diffusers are included to create a softer lighting environment.
Overview Frame Assembly Diagram D W D W H2 H2 H2 H2 H1 H1 H1 H1 W D W 1 H1 rod (×4) 2 H2 rod (×4) 3 D rod (×4) 4 W rod (×4) 5 Pole connector (×4) 6 Corner connector (×8) D 1 5 2 3 4 6 3
Overview Booth and Accessories 1 3 22 5 4 6 7 88 4 1 Shell 2 LED strip (×8) 3 Dimmable power supply (×8) 4 Front diffuser 5 LED diffuser strip (×2 height, ×2 width) Extra pole connector 6 Background clip (×3) Extra corner connector 7 Backdrops Extra magnet for LED strip 8 Apparel rod Carry bag 9 Apparel rod connector (×2) 9 Also Included
Assembly Assembling the Frame 1. Use the pole connectors to fit the four H1 and four H2 rods together. 1 H2 2. Form a box of two D and two W rods with the corner connectors. 2 3. Put the four H1/H2 assemblies into the four corners. 3 4. Tip the frame on its side, and complete the frame with the two remaining D and W rods and corner connectors. 4 2 3 D W H2 H1 1 4 H2 H2 W W H1 D H1 H1 D H2 D W H1 Completing the Booth 1.
Operation Attaching the LEDs The eight LED strips have magnets that allow you to attach them to any section of the frame. • Use the LED strips as key lights by attaching them to the front-top or front-side rods. • Use the LED strips as accent or back lights by attaching them to the back-top or back-side rods. To power the LED strips, attach the LED and dimmer power cords. Lock the connectors together with a quarter-turn twist, which will prevent power loss if there is an accidental tug on the cord.
Operation Side Flaps The side flaps can be partially or entirely unzipped for an unobstructed view or when shooting your subject from a side angle. To unzip the side flaps and secure them so they’re out of the way, follow these steps: 1. Unzip one or both side flaps. 2. Fold or roll the flaps outward so the silver fabric faces out. 13 3. Use the touch-fastener strips at the top and bottom of the flaps to secure the folded flap and keep it out of the way as you shoot.
One-Year Limited Warranty This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.