PLB-400 Pro Photo LED Booth with Dimmer INSTRUCTIONS
Introduction Thank you for choosing Impact. Impact’s PLB-400 portable LED photo booth is ideal for shooting large products, apparel, and portraits. It’s designed to provide the flexibility photographers need to create professional, shadowless images. The booth is lined with reflective, textured silver fabric for dramatic specular lighting, and diffusers are included to create a softer lighting environment.
Overview Frame Assembly Diagram D W D W H2 H2 H2 H2 H1 H1 H1 H1 W D W D 1 1 H1 rod (×4) 2 H2 rod (×4) 3 D rods (×4) 4 W rods (×4) 5 Pole connector (×4) 6 Corner connector (×8) 5 2 3 4 6 3
Overview Booth and Accessories 1 33 22 5 4 6 7 88 4 1 Shell 2 LED strip (×8) 3 Dimmable power supply (×8) 4 Front diffuser 5 LED diffuser strips (×2 height, x2 width) 6 Background clip (×3) 7 Backdrops 8 Apparel rod Also Included Extra pole connector Extra corner connector Extra magnet for LED strip Carry bag
Assembly Assembling the Frame 1. Use the pole connectors to fit the four H1 and four H2 rods together. 1 H2 2. Form a box of two D and two W rods with the corner connectors. 2 3. Put the four H1/H2 assemblies into the four corners. 3 4. Tip the frame on its side, and complete the frame with the two remaining D and W rods. 4 2 3 D W H2 H1 1 4 H2 H2 W W H1 D H1 H1 D H2 D W H1 Completing the Booth 1. Lay the frame on its side, so the width sections are on the top and bottom. 2.
Assembly Attaching the LEDs The eight LED strips have magnets that allow you to attach them to any section of the frame. • Use the LED strips as key lights by attaching them to the front-top or front-side rods. • Use the LED strips as accent or back lights by attaching them to the back-top or back-side rods. The booth is designed with eight holes that allow you to pass the power cords through and attach them to the dimmers. Align the LED strips so the cord is close to one of the holes.
Operation Diffuser Strips The diffuser strips extend along the entire height or width of the booth, and they’re designed to diffuse the light from the LED strips. Attach the hooks at the ends of the diffuser strip to opposing rods. 11 11 Attaching a Background The included white, black, and blue vinyl backgrounds are long enough to cover the back and bottom of the booth. 1. Use the hooks to attach the clips along the top rod at the back of the booth. 12 2.
One-Year Limited Warranty This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
