User's Manual

A transceiver is a device comprising both a transmitter and a receiver combined to share

common circuitry or a single housing.

MountingtheTransceiver(Transmitter):

Connecting the Transceiver to Your Flash

Using the Transceiver with Your Flash

OnaCamera: With all of the devices

turned off, slide the transceiver onto your

camera’s hot-shoe mount. Tighten the

locking ring to secure.

OnaBracket: With all of the devices

turned off, slide the transceiver onto the

bracket’s cold shoe-mount. Connect the

devices with the included 2.5 mm to PC

cable, with the 2.5 mm end inserted in the

transceiver’s input. Then plug the PC end of

the cable into your camera’s PC port.