User Manual
12
Compatible Devices
The PowerSync 16-80 does not transmit TTL (through-the-lens) settings. A flash,
with full manual output control is required for use with this device. Most manual
flashes are compatible with the PowerSync 16-80’s receiver hot-shoe mount.
Ones that are not are the Sony/Minolta, Sony Multi-Interface, and Pentax flashes.
The hot-shoe foot is compatible with all hot-shoe cameras except for Sony/
Minolta and Pentax.
Backwards Compatibility
The PowerSync 16-80 is backward compatible with the PowerSync 16 Radio
Slave System.
PowerSync16TransmittertoPowerSync16-80asReceiver:
The PowerSync 16 transmitter can be used to trigger the PowerSync 16-80. Set
your PowerSync 16-80 to Receiver (Rx) or Transmitter/Receiver (Tx/Rx) mode
using the M button to accept a signal from the PowerSync 16 transmitter. Ensure
the channel on both devices is identical. See chart below.
PowerSync16-80TransmittertoPowerSync16asReceiver:
The PowerSync 16-80 can be used to trigger the PowerSync 16 receiver. Set your
PowerSync 16-80 to Transmitter (Tx) or Transmitter/Receiver (Tx/Rx) mode using