User Manual

25
ContinuousShooting:
Option1:Press/HoldContinuousShooting
1.With all devices turned off, connect the receiving (on-camera) transceiver to the camera
by plugging the camera dedicated shutter release cable into the Camera remote
[ ] port and the other 3.5mm end into the transceiver’s output [ ]. (Attach the
Transceiver to the camera by using the lanyard or a cold shoe bracket)
2.Turn on your camera and set it to continuous shooting mode. Make sure to set your
camera to any shutter speed other than Bulb.
3.Turn on the transceiver and set it to Transmitter/Receiver (Tx/Rx) mode using the M
button.
4.On the transceiver, half press the Shutter Release button to auto-focus the camera.
5.Fully press and hold the Shutter Release button to activate the camera’s shutter.
6.Release the button to stop continuous shooting.