User Manual

27
Using Wired Bulb Mode
Option1:Press/Hold Long Exposure
1.With all devices turned off, connect and secure the transceiver to the camera by plugging
the camera dedicated shutter release cable into the Camera remote [ ] port and the
other 3.5mm end into the transceiver’s output [ ]. (Attach the Transceiver to the
camera by using the lanyard or a cold shoe bracket)
2.Turn on your camera and set it to Bulb.
3.Turn on the transceiver and set it to Transmitter/Receiver (Tx/Rx) mode using the M
button.
4.On the transceiver, push and hold the Shutter Release button to open the camera’s
shutter.
5.Release the button when the desired exposure time has elapsed.