User Manual

30
transceivers are set to Channel 1,
the on-flash unit should be set to
Channel 2. Ensure the selected group
matches the first two units.
6.Half-press the transceivers shutter
release button to auto-focus the
camera, then press and release
the Shutter Release button on the
in-hand transceiver to fire the remote
camera and flash. The remote flash
will synchronize with the camera
automatically.
Device Applicable Modes
In-Hand Transmitter (Tx), Transmitter/Receiver (Tx/Rx)
On-Camera Transmitter/Receiver (Tx/Rx)
On-Flash Receiver (Rx), Transmitter/Receiver (Tx/Rx)
Advanced Features
The following chart illustrates the modes that differently purposed devices need to be set to
while using the auto-sync triggering function:
On-Camera
(Tx/Rx
Channel 1)
On-Flash
(Rx or Tx/Rx
Channel 2)
In-Hand
(Tx or Tx/Rx
Channel 1)