User Manual

Triggering a Remote Camera

Bulb Mode

1. Set your camera to bulb mode.

2. Half-press the test button to wake the camera or activate

autofocus.

3. Fully press the test button to focus and open the

camera’s shutter.

4. Release the test button to close the shutter and end the

exposure.

Bulb Lock

Bulb lock lets you trigger the camera and leave the shutter open

indenitely without holding the test button.

1. Set your camera to bulb mode.

2. Press and hold the test button for three seconds to lock the

shutter open. Releasing the test button will not close the

shutter.

3. Press the test button again to close the shutter and end the

exposure.