Impact Quikbox™ INSTRUCTIONS
Impact Quikbox Components Softbox Shell Inner Diffuser Speed Ring Speed Ring Bracket Outer Diffuser Carrying Case Speed Ring Bracket Components Miniature Thumbscrew Thumbscrew C Thumbscrew A 2 Cold Shoe Thumbscrew B
Introduction Congratulations on your purchase of the Impact Quikbox™. This revolutionary pop-up softbox was designed to be portable and simple to set up, giving photographers a quality flash diffuser at an affordable price.
Quikbox Assembly Instructions The Impact Quikbox consists of two main parts: a pre-built, internal rod softbox that allows for rapid assembly, and a speed ring bracket that allows for the installation of both flash heads and radio receivers in a variety of versatile configurations 1. 4 Remove softbox shell from carry bag and begin unfolding by pulling panels outward like a book 2.
3. Hold both speed ring bracket parts and loosen thumbscrew C on bracket handle; then slide circular speed ring into the bracket handle and tighten thumbscrew 4.
Quikbox Assembly Instructions 5. 6 Rotate the speed ring to accurately square it up on softbox shell and ensure softbox is securely held in place 6.
. Install inner diffuser by fastening metal clips found on smaller diffuser cloth to elastic loops found on each corner of softbox interior 8.
Speed Ring Bracket Instructions Installing Flash Head On Bracket 1. 8 Mount flash shoe directly on cold shoe adapter found atop bracket handle and tighten miniature thumbscrew to secure 2.
3. Depending on height of flash head, it may be beneficial to remove the two disc-shaped washers found under cold shoe adapter assembly 4.
Speed Ring Bracket Instructions Installing Radio Receiver On Bracket (Optional) The Impact Quikbox has a unique system that allows for most radio receivers to be mounted on the speed ring bracket (regardless of whether it has a male shoe) by incorporating the universal 1/4” 20 screw mount 1. 10 Remove cold shoe adapter assembly and ensure universal 1/4” 20 screw is exposed; mount radio receiver on top of exposed 1/4” 20 screw 2.
3. Depending on height of radio receiver and/or flash head, it may be beneficial to remove the two disc-shaped washers found under cold shoe adapter assembly for optimal fit 4.
Breaking Down The Quikbox 1. 12 Remove flash head and/or radio receiver from bracket; be sure to re-attach any washers or pieces that may have been removed 2.
3. Carefully lift speed ring bracket away from elastic rims located in back of softbox 4.
Breaking Down The Quikbox 5. 14 Snap opposing corners of softbox panels together; then fold remaining two panels together as if closing a book and stow collapsed softbox shell inside carrying case 6.
One-Year Limited Warranty This IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
GG2
