Impact Quikbox™Softbox INSTRUCTIONS
Introduction Congratulations on your purchase of the Impact Quikbox™Softbox. This revolutionary pop-up softbox was designed to be portable and simple to set up, giving photographers a quality flash diffuser at an affordable price.
Setting up the Softbox The Impact Quikbox Softbox consists of a pre-built, internal rod softbox that allows for rapid assembly. To assemble your Quikbox Softbox, follow these instructions: 1. Remove softbox shell from carry bag and begin unfolding by pulling panels outward like a book 2. Rotate softbox so that larger opening faces toward you; then spread apart the opposing panels until softbox shell pops open into a squareshaped box.
Installing the Diffusers 1. 4 Install inner diffuser by fastening metal clips found on smaller diffuser cloth to elastic loops found on each corner of softbox interior 2.
Inserting the Speed Ring The elastic rim located in the back of the softbox will accommodate a universal (~145 mm) speed ring insert (sold separately). To mount a speed ring insert, follow these instructions: 1. Gently wedge the wide end of the insert under the elastic rims located in the back of the softbox. 2. Mount the Impact Quikbox Softbox onto your strobe light. Note: For instructions on how to mount your Impact Quikbox to your strobe, refer to your strobe’s instruction manual.
Breaking Down The Quikbox Softbox 1. 6 Remove the entire Quikbox and speed ring assembly from your strobe. Note that the speed ring may be hot to the touch due to the heat of the strobe or modeling light. In that case, wait for it to cool before proceeding to the next step. 2. Carefully lift speed ring bracket away from elastic rims located in the back of the softbox.
Breaking Down The Quikbox Softbox 3. If desired, the softbox shell may be stored with both diffusers still in place; otherwise, remove the diffuser fabrics entirely and place them inside the carrying case. 4. Snap the opposing corners of the softbox panels together, then fold the remaining two panels together as if closing a book, and stow the collapsed softbox shell inside the carrying case.
One-Year Limited Warranty This IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.