QL-3560-LED Qualite LED Floodlight INSTRUCTIONS 1
Introduction Thank you for choosing Impact. The QL-3560-LED is the digital LED version of Impact’s popular Qualite. This high-output fixture draws only 34 watts and operates on both AC and DC power. It features a TIR LED panel that furnishes a focused and bright beam with a long reach. The color temperature of 5600 K and a CRI of 97 deliver a natural-looking daylight beam with high color rendering and accuracy.
Specifications Light Fixture Beam Angle 45° Color Temperature 5600 K Color Accuracy Standard CRI: 97 Cooling System Passive Dimming Yes, 0% to 100% Display LCD Housing Material Metal Light Intensity @ 3 ft. 9150 lx Number of LEDs 36 Expected Lamp Life 50,000 hr. Dimensions (L × W × H) 8.4 × 7.5 × 5.6 in. (21.3 × 19 × 14.2 cm) Weight 1.9 lb. (0.86 kg) without barndoors 2.5 lb. (1.13 kg) with barndoors Connectors Power Input Connector 2.5 mm barrel Mounting Fixture Mount 5/8 in.
Overview Qualite LED Daylight 4 1 Locking screw 13 Power adapter 2 Barndoors 14 Power cord 3 Barndoor Slot 15 Orange filter 4 Accessory Slot 16 Diffuser 5 Barndoor mounting collar 6 LED panel 7 Umbrella mount 8 Tilt adjustment knob 9 5/8 in.
1 11 6 2 12 5 4 8 3 7 9 10 13 14 15 16 5
Mounting the Qualite LED The Qualite LED mounts on any standard light stand with a 5/8 in. stud. 1. Loosen the locking screw, and seat the receiver onto the 5/8 in. stud. 2. Tighten the locking screw until secure. Do not overtighten.
Attaching the Barndoors The barndoors shape the beam and prevent light spill. To attach the barndoors: 1. Loosen the locking screw, and open the hinged accessory bracket. 2. Slide the barndoor mounting collar into the accessory slot of the accessory bracket. 3. Close the accessory bracket, and tighten the locking screw until secure. When properly installed, the barndoors should rotate 360°. 1. 3.
Using the Diffuser and Filter The diffuser and orange filter can be used with or without the barndoors. Use the diffuser to soften the light and cut down on harsh shadows. Use the orange filter to emulate the warm light of a tungsten bulb with a color temperature of approximately 3200 K. Insert the filter or diffuser into the accessory slot. When using the diffuser or filter with the barndoors, insert the disk in the accessory slot between the light and barndoors.
Adjusting the Light Angle Important! Always support the light with one hand while loosening the tilt knob to reposition the light. 1. Loosen the tilt adjustment knob, and position the light as desired. 2. Retighten the knob. Do not overtighten.
Powering On and Adjusting the Brightness Before connecting the Qualite LED to a power source, make sure the light is turned off. AC Power 1. Plug the power adapter cord into the power socket. 2. Attach the power cord to the power adapter, and plug it into an available outlet. 3. Turn the power/dimmer knob clockwise to power on and adjust the brightness level. DC Power The Qualite LED can be powered by a V-mount battery using the Watson Pro CA-DTAP-25M cable (sold separately).
Attaching a Speed Ring The Angler 7464-SFS speed ring (sold separately) allows you to attach most major brands of softboxes to the Qualite LED. To attach a speed ring, remove the barndoors, and follow these steps: 1. Loosen the locking screw, and open the hinged accessory bracket. 2. Slide the speed ring into the barndoor slot of the accessory bracket. 3. Close the accessory bracket, and tighten the locking screw until secure. When properly installed, the speed ring should rotate 360°.
One-Year Limited Warranty This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
